Hot Swappable, Dual I2C Isolators with
Integrated DC-to-DC Converter
ADM3260
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
isoPower integrated, isolated dc-to-dc converter
Regulated 3.15 V to 5.25 V output
Up to 150 mW output power
High common-mode transient immunity: >25 kV/µs
iCoupler integrated I2C digital isolator
Bidirectional I2C communication
3.0 V to 5.5 V supply/logic levels
Open-drain interfaces
ADM3260
GNDP
SCL2
DECODE
ENCODE
DECODE
ENCODE
ENCODE
DECODE
ENCODE
DECODE
GNDISO
SCL1
SDA2
VDDP
SDA1
VDDISO
GNDISO
SIGNAL ISOLATION
GNDP
NC
Suitable for hot swap applications
30 mA current sink capability
1000 kHz maximum frequency
NC
20-lead SSOP package with 5.3 mm creepage
High temperature operation: 105°C
Safety and regulatory approvals
POWER ISOLATION
GNDP
GNDISO
VSEL
VISO
PCS
PDIS
VIN
UL recognition
RECT REG
OSC
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A
VDE Certificate of Conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
GNDISO
GNDP
Figure 1.
V
IORM = 560 V peak
Table 1. Power Levels for Isolated Converter
Input Voltage (V) Output Voltage (V)
Output Power (mW)
APPLICATIONS
Isolated I2C, SMBus, and PMBus interfaces
Multilevel I2C interfaces
5.0
5.0
3.3
5.0
3.3
3.3
150
100
66
Central office switching
Telecommunication and data communication equipment
−48 V distributed power systems
−48 V power supply modules
Networking
Based on the Analog Devices, Inc., isoPower technology, the
on-chip isolated dc-to-dc converter provides a regulated, isolated
voltage of 3.15 V to 5.25 V with up to 150 mW of output power
(see Figure 1).
GENERAL DESCRIPTION
Based on the iCoupler® and isoPower® chip scale transformer
technology, the ADM32601 is a hot swappable digital and power
isolator with two nonlatching, bidirectional communication
channels, supporting a complete isolated I2C interface, and an
integrated isolated dc-to-dc converter, supporting up to
150 mW of isolated power conversion.
With the ADM3260, the iCoupler and isoPower channels, along
with the I2C transceivers, can be integrated with semiconductor
circuitry, which enables a complete isolated I2C interface and
allows the power converter to be implemented in a small form
factor. The ADM3260 is available in 20-lead SSOP package and
has an operating temperature range of −40°C to+105°C.
iCoupler is a chip scale transformer technology with functional,
performance, size, and power consumption advantages as
compared to optocouplers. The bidirectional I2C channels
eliminate the need for splitting I2C signals into separate transmit
and receive signals for use with standalone optocouplers.
isoPower uses high frequency switching elements to transfer power
through its transformer. Special care must be taken during printed
circuit board (PCB) layout to meet emissions standards. See the
AN-0971 Application Note for board layout recommendations.
1 Protected by U.S. Patents 5,952,849; 6,873,065; and 7,075,329. Other patents are pending.
Rev. E
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarks and registeredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2020 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com