Six Current Channels, One Voltage Channel
Energy Metering IC
Data Sheet
ADE7816
voltage and current. The device incorporates seven sigma-delta
(Σ-Δ) ADCs with a high accuracy energy measurement core.
FEATURES
Measures active and reactive energy, sampled waveforms,
and current and voltage rms
6 current input channels and 1 voltage channel
<0.1% error in active and reactive energy over a dynamic
range of 1000:1
Supports current transformer and Rogowski coil sensors
Provides instantaneous current and voltage readings
Angle measurements on all 6 channels
2 kHz bandwidth operation
The six current input channels allow multiple loads to be measured
simultaneously. The voltage channel and the six current channels
each have a complete signal path allowing for a full range of
measurements. Each input channel supports a flexible gain stage
and is suitable for use with current transformers (CTs). Six on-
chip digital integrators facilitate the use of the Rogowski coil
sensors.
The ADE7816 provides access to on-chip meter registers via either
the SPI or I2C interface. A dedicated high speed interface, the
high speed data capture (HSDC) port, can be used in conjunction
with I2C to provide access to real-time ADC output information.
A full range of power quality information, such as overcurrent,
overvoltage, peak, and sag detection, is accessible via the two
Reference: 1.2 V (drift 10 ppm/°C typical) with external
overdrive capability
Flexible I2C, SPI, and HSDC serial interfaces
GENERAL DESCRIPTION
The ADE7816 is a highly accurate, multichannel metering
device that is capable of measuring one voltage channel and up
to six current channels. It measures line voltage and current and
calculates active and reactive energy, as well as instantaneous rms
IRQ0
IRQ1
external interrupt pins,
and
.
The ADE7816 energy metering IC operates from a 3.3 V supply
voltage and is available in a 40-lead LFCSP that is Pb free and
RoHS compliant.
FUNCTIONAL BLOCK DIAGRAM
REF
RESET
4
IN/OUT
17
DGND
6
27
28
CLKIN
2
3
PULL_HIGH
PULL_LOW
VRMSOS
1.2V
REF
ADE7816
CLKOUT
VGAIN
2
VRMS
X
LPF
15
16
VP
VN
ADC
PGA2
PGA1
HPF
HPF
AWATTOS
AWGAIN
IAGAIN
DIGITAL
INTEGRATOR
29
32
36
IRQ0
PCF_A_COEFF
2
SPI/I C
LPF
IRQ1
7
8
IAP
IAN
ENERGY
AND RMS
DATA
ADC
AVAROS AVARGAIN
SCLK/SCL
ALL
COMPUTATIONAL
BLOCK FOR
CHANNELS
38 MOSI/SDA
37 MISO/HSD
9
TOTAL
IBP
REACTIVE POWER
PGA1
PGA1
ADC
ADC
ADC
ADC
ADC
ENERGY AND RMS CALCULATIONS SEE
CHANNEL A FOR DETAILED SIGNAL PATH
2
I C
IBN 12
IARMSOS
ICP 13
ICN 14
39 SS/HSA
35 HSCLK
HSDC
ENERGY AND RMS CALCULATIONS SEE
CHANNEL A FOR DETAILED SIGNAL PATH
2
IARMS
X
LPF
23
22
19
IDP
IEP
IFP
PGA3
PGA3
PGA3
ENERGY AND RMS CALCULATIONS SEE
CHANNEL A FOR DETAILED SIGNAL PATH
1
NC
10 NC
11 NC
20 NC
21 NC
30 NC
ENERGY AND RMS CALCULATIONS SEE
CHANNEL A FOR DETAILED SIGNAL PATH
POR
26
LDO
LDO
ENERGY AND RMS CALCULATIONS SEE
CHANNEL A FOR DETAILED SIGNAL PATH
IN 18
25
24
5
40
NC
34
33
31
VDD AGND
AVDD
DVDD
NC
NC
NC
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2012 Analog Devices, Inc. All rights reserved.