12-Bit, 170 MSPS/210 MSPS/250 MSPS,
1.8 V Dual Analog-to-Digital Converter (ADC)
AD9613
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
AVDD
AGND
DRVDD
SNR = 69.6 dBFS at 185 MHz fIN and 250 MSPS
SFDR = 86 dBc at 185 MHz fIN and 250 MSPS
−149.9 dBFS/Hz input noise at 185 MHz, −1 dBFS AIN and
250 MSPS
Total power consumption: 770 mW at 250 MSPS
1.8 V supply voltages
VIN+A
PIPELINE
12-BIT
ADC
12
D0±
.
.
.
.
.
VIN–A
VCM
PARALLEL
DDR LVDS
AND
AD9613
VIN+B
PIPELINE
12-BIT
ADC
12
D11±
DRIVERS
LVDS (ANSI-644 levels) outputs
VIN–B
Integer 1-to-8 input clock divider (625 MHz maximum input)
Sample rates of up to 250 MSPS
IF sampling frequencies of up to 400 MHz
Internal ADC voltage reference
Flexible analog input range
1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal)
ADC clock duty cycle stabilizer
DCO±
OR±
REFERENCE
1 TO 8
CLOCK
DIVIDER
SERIAL PORT
OEB
PDWN
SCLK SDIO
CSB
CLK+
CLK– SYNC
95 dB channel isolation/crosstalk
Serial port control
NOTES
1. THE D0± TO D11± PINS REPRESENT BOTH THE CHANNEL A
AND CHANNEL B LVDS OUTPUT DATA.
Energy-saving power-down modes
Figure 1.
APPLICATIONS
Communications
Diversity radio systems
Multimode digital receivers (3G)
TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM, EDGE, LTE
I/Q demodulation systems
Smart antenna systems
General-purpose software radios
Ultrasound equipment
Broadband data applications
GENERAL DESCRIPTION
The AD9613 is a dual 12-bit, analog-to-digital converter (ADC)
with sampling speeds of up to 250 MSPS. The AD9613 is designed
to support communications applications where low cost, small
size, wide bandwidth, and versatility are desired.
Programming for setup and control is accomplished using a
3-wire SPI-compatible serial interface.
The AD9613 is available in a 64-lead LFCSP and is specified
over the industrial temperature range of −40°C to +85°C. This
product is protected by a U.S. patent.
The dual ADC cores feature a multistage, differential pipelined
architecture with integrated output error correction logic. Each
ADC features wide bandwidth inputs supporting a variety of user-
selectable input ranges. An integrated voltage reference eases design
considerations. A duty cycle stabilizer (DCS) is provided to
compensate for variations in the ADC clock duty cycle,
PRODUCT HIGHLIGHTS
1. Integrated dual, 12-bit, 170 MSPS/210 MSPS/250 MSPS ADCs.
2. Fast overrange and threshold detect.
3. Proprietary differential input maintains excellent SNR
performance for input frequencies of up to 400 MHz.
4. SYNC input allows synchronization of multiple devices.
5. 3-pin, 1.8 V SPI port for register programming and register
readback.
allowing the converters to maintain excellent performance.
The ADC output data is routed directly to the two external 12-bit
LVDS output ports and formatted as either interleaved or channel
multiplexed.
6. Pin compatibility with the AD9643, allowing a simple
migration up to 14 bits, and with the AD6649 and the AD6643.
Flexible power-down options allow significant power savings,
when desired.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com