AD8132
ABSOLUTE MAXIMUM RATINGS1, 2
PIN FUNCTION DESCRIPTIONS
Pin No. Name Function
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
VOCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS
Internal Power Dissipation . . . . . . . . . . . . . . . . . . . . 250 mW
Operating Temperature Range . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . . 300°C
1
2
–IN
VOCM
Negative Input.
Voltage applied to this pin sets the common-
mode output voltage with a ratio of 1:1. For
example, 1 V dc on VOCM will set the dc bias
level on +OUT and –OUT to 1 V.
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above listed in the operational section of this
specification is not implied. Exposure to Absolute Maximum Ratings for any
extended periods may affect device reliability.
3
4
V+
Positive Supply Voltage.
+OUT Positive Output. Note: the voltage at –DIN is
inverted at +OUT.
–OUT Negative Output. Note: the voltage at +DIN
is inverted at –OUT.
2Thermal resistance measured on SEMI standard 4-layer board.
8-Lead SOIC: θJA = 121°C/W
8-Lead µSOIC: θJA = 142°C/W
5
6
7
8
V–
NC
+IN
Negative Supply Voltage.
No Connect.
Positive Input.
2.0
T
= 150ꢃC
PIN CONFIGURATION
J
8-LEAD SOIC
PACKAGE
1.5
1.0
0.5
0
AD8132
1
2
3
4
8
7
6
5
–IN
+IN
NC
V
OCM
+
V+
V–
8-LEAD
microSOIC
–OUT
+OUT
NC = NO CONNECT
–50 –40 –30 –20 –10
0
10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE – ꢃC
Figure 2. Plot of Maximum Power Dissipation vs.
Temperature
ORDERING GUIDE
Model
Temperature Range
Package Description
Package Option
AD8132AR
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
8-Lead SOIC
SO-8
AD8132AR-REEL1
AD8132AR-REEL72
AD8132ARM
13" Tape and Reel
7" Tape and Reel
8-Lead µSOIC
13" Tape and Reel
7" Tape and Reel
Evaluation Board
SM-8
AD8132ARM-REEL3
AD8132ARM-REEL72
AD8132-EVAL
NOTES
113" Reels of 2500 each.
27" Reels of 1000 each.
313" Reels of 3000 each.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD8132 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–5–
REV. 0