AD6C101
1 Form A
DESCRIPTION
The AD6C101 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. With a high blocking voltage
(600V), it is designed to replace electromechanical relays in high voltage switching applications. The relay consists of an integrated circuit
that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output
MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching
lamps and highly inductive loads.
FEATURES
APPLICATIONS
High Blocking Voltage (600V)
High Input-Output Isolation (3750V)
120mA MAX Continuous Load Current
On Resistance 40 ohms MAX
Long Life/High Reliability
Reed relay replacement
•
•
•
•
•
•
•
•
•
•
Meter reading systems
Medical equipment
Battery monitoring
Multiplexers
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
Storage Temperature
Operating Temperature
Continuous Input Current
Transient Input Current
UNIT
°C
MIN
-55
-40
TYP
MAX
125
85
-H
-S
High Input-to-Output Isolation
Surface Mount Leadform Option
•
•
•
-TR Tape and Reel Option
°C
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
mA
mA
V
50
400
SCHEMATIC DIAGRAM
Reverse Input Control
Voltage
6
Output Power Dissipation
mW
600
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD6C101
rev 1.40 (10/25/2004)