Datasheet > AD677KNZ

AD677KNZ

更新时间： 2024-02-05 14:08:03

品牌	Logo	应用领域
其他 - ETC		转换器光电二极管信息通信管理 PC
页数	文件大小	规格书
12页	149K
描述
MICROCIRCUIT, DIGITAL-LINEAR, FAST, SERIAL, 16-BIT, A/D CONVERTER, MULTICHIP SILICON

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AD677KNZ 技术参数

是否无铅：	含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	SOIC
包装说明：	SOP, SOP28,.4	针数：	28
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.08
最大模拟输入电压：	10 V	最小模拟输入电压：	-10 V
转换器类型：	ADC, SUCCESSIVE APPROXIMATION	JESD-30 代码：	R-PDSO-G28
JESD-609代码：	e3	长度：	17.9 mm
最大线性误差 (EL)：	0.0023%	湿度敏感等级：	5
标称负供电电压：	-12 V	模拟输入通道数量：	1
位数：	16	功能数量：	1
端子数量：	28	最高工作温度：	70 °C
最低工作温度：		输出位码：	BINARY
输出格式：	SERIAL	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装等效代码：	SOP28,.4
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260	电源：	5,+-12 V
认证状态：	Not Qualified	采样速率：	0.1 MHz
采样并保持/跟踪并保持：	SAMPLE	座面最大高度：	2.65 mm
子类别：	Analog to Digital Converters	标称供电电压：	12 V
表面贴装：	YES	技术：	BICMOS
温度等级：	COMMERCIAL	端子面层：	Matte Tin (Sn)
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	30
宽度：	7.5 mm	Base Number Matches：	1

AD677KNZ 数据手册

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with

MIL-PRF-38535 as specified herein, or as modified in the device manufacturer's Quality Management (QM) plan. The

modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for

device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified

herein.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.

3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the

electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full

ambient operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be

marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer

has the option of not marking the "5962-" on the device. For RHA product using this option, the RHA designator shall still be

marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be

in accordance with MIL-PRF-38535, appendix A.

3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in

MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.

3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535

listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of

compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see

6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of

supply for this drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of

MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.

3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for

device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.

3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of

product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing.

3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritime’s agent,

and the acquiring activity retain the option to review the manufacturer's facility and applicable required documentation. Offshore

documentation shall be made available onshore at the option of the reviewer.

3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

microcircuit group number H (see MIL-PRF-38535, appendix A).

SIZE

STANDARD

5962-95592

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

REVISION LEVEL

SHEET

COLUMBUS, OHIO 43218-3990

DSCC FORM 2234

APR 97

1 2 345 6 7...12

下载PDF

与AD677KNZ相关器件

型号	品牌	描述	获取价格	数据表
AD677KR	ADI	16-Bit 100 kSPS Sampling ADC	获取价格
AD677KR	ROCHESTER	1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO28, PLASTIC, SOIC-28	获取价格
AD677KRZ	ROCHESTER	1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO28, PLASTIC, SOIC-28	获取价格
AD677KRZ-REEL	ADI	16-Bit, Serial, 100 kSPS Sampling ADC.	获取价格
AD677TD	ADI	MICROCIRCUIT, DIGITAL-LINEAR, FAST, SERIAL, 16-BIT, A/D CONVERTER, MULTICHIP SILICON	获取价格
AD677TD/883B	ETC	Analog-to-Digital Converter， 16-Bit	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

AD677KNZ

AD677KNZ 技术参数

AD677KNZ 数据手册

与AD677KNZ相关器件

与AD677KNZ相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD677KNZ

AD677KNZ 技术参数

AD677KNZ 数据手册

与AD677KNZ相关器件

与AD677KNZ相关文章

您还可以找

您在本页遇到什么问题？