5秒后页面跳转
AD5316ARU-REEL7 PDF预览

AD5316ARU-REEL7

更新时间: 2024-01-14 02:49:35
品牌 Logo 应用领域
亚德诺 - ADI 转换器光电二极管
页数 文件大小 规格书
24页 528K
描述
2.5 V to 5.5 V, 400 μA, 2-Wire Interface, Quad Voltage Output, 8-/10-/12-Bit DACs

AD5316ARU-REEL7 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:TSSOP包装说明:TSSOP, TSSOP16,.25
针数:16Reach Compliance Code:not_compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:5.59最大模拟输出电压:5.499 V
最小模拟输出电压:0.001 V转换器类型:D/A CONVERTER
输入位码:BINARY输入格式:SERIAL
JESD-30 代码:R-PDSO-G16JESD-609代码:e0
长度:5 mm最大线性误差 (EL):0.293%
湿度敏感等级:1位数:10
功能数量:1端子数量:16
最高工作温度:105 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP16,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):240
电源:3/5 V认证状态:Not Qualified
座面最大高度:1.2 mm最大稳定时间:9 µs
标称安定时间 (tstl):7 µs子类别:Other Converters
最大压摆率:0.9 mA标称供电电压:3 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子面层:Tin/Lead (Sn85Pb15)
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:30
宽度:4.4 mmBase Number Matches:1

AD5316ARU-REEL7 数据手册

 浏览型号AD5316ARU-REEL7的Datasheet PDF文件第18页浏览型号AD5316ARU-REEL7的Datasheet PDF文件第19页浏览型号AD5316ARU-REEL7的Datasheet PDF文件第20页浏览型号AD5316ARU-REEL7的Datasheet PDF文件第21页浏览型号AD5316ARU-REEL7的Datasheet PDF文件第23页浏览型号AD5316ARU-REEL7的Datasheet PDF文件第24页 
AD5306/AD5316/AD5326  
POWER SUPPLY DECOUPLING  
In any circuit where accuracy is important, careful consideration  
of the power supply and ground return layout helps to ensure  
the rated performance. The printed circuit board on which the  
AD5306/AD5316/AD5326 is mounted should be designed so  
the analog and digital sections are separated and confined to  
certain areas of the board.  
The power supply lines of the AD5306/AD5316/AD5326 should  
use as large a trace as possible to provide low impedance paths  
and reduce the effects of glitches on the power supply line.  
Components with fast-switching signals, such as clocks, should  
be shielded with digital ground to avoid radiating noise to other  
parts of the board, and they should never be run near the  
reference inputs. A ground line routed between the SDA and  
SCL lines helps to reduce crosstalk between them. Although a  
ground line is not required on a multilayer board because there is  
a separate ground plane, separating the lines helps.  
If the AD5306/AD5316/AD5326 is in a system where multiple  
devices require an AGND-to-DGND connection, the connection  
should be made at one point only. The star ground point should  
be established as close as possible to the device. The AD5306/  
AD5316/AD5326 should have ample supply bypassing of 10 μF  
in parallel with 0.1 μF on the supply located as close to the  
package as possible, ideally right up against the device. The 10 μF  
capacitors are the tantalum bead type. The 0.1 μF capacitor should  
have low effective series resistance (ESR) and low effective  
series inductance (ESI), like the common ceramic types that  
provide a low impedance path to ground at high frequencies to  
handle transient currents due to internal logic switching.  
Avoid crossover of digital and analog signals. Traces on opposite  
sides of the board should run at right angles to each other. This  
reduces the effects of feedthrough through the board. A micro-  
strip technique is the best method, but its use is not always  
possible with a double-sided board. In this technique, the  
component side of the board is dedicated to ground plane while  
signal traces are placed on the solder side.  
Table 8. Overview of AD53xx Serial Devices1  
Part No.  
SINGꢀES  
AD5300  
AD5310  
AD5320  
AD5301  
AD5311  
AD5321  
DUAꢀS  
AD5302  
AD5312  
AD5322  
AD5303  
AD5313  
AD5323  
QUADS  
AD5304  
AD5314  
AD5324  
AD5305  
AD5315  
AD5325  
AD5306  
AD5316  
AD5326  
AD5307  
AD5317  
AD5327  
OCTAꢀS  
AD5308  
AD5318  
AD5328  
Resolution  
No. of DACs  
DNꢀ  
0.25  
0.5  
1.0  
0.25  
0.5  
1.0  
Interface  
Settling Time (μs) Package  
Pins  
8
1
1
1
1
1
1
SPI  
SPI  
SPI  
2-wire  
2-wire  
2-wire  
4
6
8
6
7
8
SOT-23, MSOP  
6, 8  
6, 8  
6, 8  
6, 8  
6, 8  
6, 8  
10  
12  
8
10  
12  
SOT-23, MSOP  
SOT-23, MSOP  
SOT-23, MSOP  
SOT-23, MSOP  
SOT-23, MSOP  
8
2
2
2
2
2
2
0.25  
0.5  
1.0  
0.25  
0.5  
1.0  
SPI  
SPI  
SPI  
SPI  
SPI  
SPI  
6
7
8
6
7
8
MSOP  
MSOP  
MSOP  
TSSOP  
TSSOP  
TSSOP  
8
8
8
16  
16  
16  
10  
12  
8
10  
12  
8
4
4
4
4
4
4
4
4
4
4
4
4
0.25  
0.5  
1.0  
0.25  
0.5  
1.0  
0.25  
0.5  
1.0  
0.25  
0.5  
1.0  
SPI  
SPI  
SPI  
2-Wire  
2-Wire  
2-Wire  
2-Wire  
2-Wire  
2-Wire  
SPI  
6
7
8
6
7
8
6
7
8
6
7
8
MSOP  
MSOP  
MSOP  
MSOP  
MSOP  
MSOP  
TSSOP  
TSSOP  
TSSOP  
TSSOP  
TSSOP  
TSSOP  
10  
10  
10  
10  
10  
10  
16  
16  
16  
16  
16  
16  
10  
12  
8
10  
12  
8
10  
12  
8
10  
12  
SPI  
SPI  
8
10  
12  
8
8
8
0.25  
0.5  
1.0  
SPI  
SPI  
SPI  
6
7
8
TSSOP  
TSSOP  
TSSOP  
16  
16  
16  
1 Visit www.analog.com/support/standard_linear/selection_guides/AD53xx.html for more information.  
Rev. F | Page 22 of 24  
 

AD5316ARU-REEL7 替代型号

型号 品牌 替代类型 描述 数据表
AD5316ARUZ ADI

完全替代

2.5 V to 5.5 V, 400 µA, 2-Wire Interface Quad Voltage Output 10-Bit DAC
AD5317ARUZ ADI

完全替代

2.5 V to 5.5 V, 400 muA, Quad Voltage Output
AD5314ARMZ ADI

类似代替

2.5 V to 5.5 V, 500 μA, Quad Voltage Output

与AD5316ARU-REEL7相关器件

型号 品牌 获取价格 描述 数据表
AD5316ARUZ ROCHESTER

获取价格

SERIAL INPUT LOADING, 7 us SETTLING TIME, 10-BIT DAC, PDSO16, LEAD FREE, MO-153-AB, TSSOP-
AD5316ARUZ ADI

获取价格

2.5 V to 5.5 V, 400 µA, 2-Wire Interface Quad Voltage Output 10-Bit DAC
AD5316ARUZ1 ADI

获取价格

2.5 V to 5.5 V, 400 μA, 2-Wire Interface, Qu
AD5316ARUZ-REEL7 ADI

获取价格

IC SERIAL INPUT LOADING, 7 us SETTLING TIME, 10-BIT DAC, PDSO16, MO-153-AB, TSSOP-16, Digi
AD5316BRU ADI

获取价格

2.5 V to 5.5 V, 400 μA, 2-Wire Interface, Qu
AD5316BRU ROCHESTER

获取价格

SERIAL INPUT LOADING, 7 us SETTLING TIME, 10-BIT DAC, PDSO16, MO-153-AB, TSSOP-16
AD5316BRU-REEL ADI

获取价格

2.5 V to 5.5 V, 400 μA, 2-Wire Interface, Qu
AD5316BRU-REEL7 ADI

获取价格

2.5 V to 5.5 V, 400 μA, 2-Wire Interface, Qu
AD5316BRUZ ADI

获取价格

暂无描述
AD5316BRUZ ROCHESTER

获取价格

SERIAL INPUT LOADING, 7 us SETTLING TIME, 10-BIT DAC, PDSO16, LEAD FREE, MO-153-AB, TSSOP-