Product specification
3
9
SERIES
0612/1020/1225
AC
Chip Resistor Surface Mount
MARKING
AC0612 / AC1020 / AC1225
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 1 Value=10 KΩ
E-24/ E-96 series: 4 digits, ±1% & ±0.5%
First three digits for significant figure and 4th digit for number of zeros
Fig. 2 Value=10 KΩ
CONSTRUCTION
OUTLINES
The resistors are constructed on top of a high-grade
ceramic body. Internal metal electrodes are added at each
end and connected by the resistive glaze. The resistive
glaze is covered by a leadfree glass. The composition of
the glaze is adjusted to give the approximate required
resistance value and laser trimming of this resistive glaze
achieves the value inside tolerance. The whole element is
covered by a protective overcoat. Size 0508 and bigger is
marked with the resistance value on top. Finally, the two
external terminations (Ni / matte tin) are added. See fig.3.
Fig. 3 Chip resistor outlines
DIMENSIONS
Table 1 For outlines, please refer to Fig. 4
TYPE
L (mm)
1.60±0.20
2.50 ±0.20
3.20 ±0.20
W (mm)
3.20 ±0.20
5.00 ±0.20
6.40 ±0.20
H (mm)
0.55±0.10
0.55±0.10
0.55±0.10
I1 (mm)
0.18±0.15
0.25 ±0.20
0.45 ±0.20
I2 (mm)
0.40±0.15
0.90 ±0.20
0.75 ±0.20
AC0612
AC1020
AC1225
For dimension, please refer to Table 1
Side view for all type
Fig. 4 Chip resistor dimensions
www.yageo.com
Dec. 11, 2015 V.1