Datasheet > AAT3680

AAT3680

更新时间： 2024-02-29 11:36:58

品牌	Logo	应用领域
AAT		电池控制器
页数	文件大小	规格书
18页	213K
描述
Lithium-Ion/Polymer Linear Battery Charge Controller

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

AAT3680 数据手册

AAT3680

Lithium-Ion/Polymer

Linear Battery Charge Controller

with a P-channel MOSFET. If there is no other pro-

tection in the system, a shorted input could dis-

charge the battery through the body diode of the

pass MOSFET. If a reverse-blocking diode is

added to the system, a device should be chosen

which can withstand the maximum constant cur-

rent charge current at the maximum system ambi-

ent temperature.

Where:

P_D(MIN)= Minimum power rating for a diode selection

V_F

= Diode forward voltage

I_CC

= Constant current charge level for the

system

Schottky Diodes

Schottky diodes are selected for this application

because they have a low forward voltage drop, typ-

ically between 0.3V and 0.4V. A lower V_Fpermits

a lower voltage drop at the constant current charge

level set by the system; less power will be dissi-

pated in this element of the circuit. Schottky

diodes allow for lower power dissipation, smaller

component package sizes, and greater circuit lay-

out densities.

Diode Selection

Typically, a Schottky diode is used in reverse current

blocking applications with the AAT3680. Other

lower cost rectifier type diodes may also be used if

sufficient input power supply headroom is available.

The blocking diode selection should based on mer-

its of the device forward voltage (V_F), current rat-

ing, and input supply level versus the maximum

battery charge voltage and cost.

Rectifier Diodes

First, determine the minimum diode forward voltage

drop requirement. Refer to the following equation:

Any general-purpose rectifier diode can be used

with the AAT3680 application circuit in place of a

higher cost Schottky diode. The design trade-off is

that a rectifier diode has a high forward voltage

drop. V_Ffor a typical silicon rectifier diode is in the

range of 0.7V. A higher V_Fwill place an input sup-

ply voltage requirement for the battery charger sys-

tem. This will also require a higher power rated

diode since the voltage drop at the constant current

charge amplitude will be greater. Refer to the pre-

viously stated equations to calculate the minimum

V_INand diode P_Dfor a given application.

V_IN(MIN)= V_BAT(MAX)+ V_F(TRAN)+ V_F(DIODE)

Where:

V_IN(MIN)= Minimum input supply level

V_BAT(MAX)= Maximum battery charge voltage

required

V_F(TRAN)= Pass transistor forward voltage drop

V_F(DIODE)= Blocking diode forward voltage

PCB Layout

Based on the maximum constant current charge

level set for the system, the next step is to deter-

mine the minimum current rating and power han-

dling capacity for the blocking diode. The constant-

current charge level itself will dictate what the mini-

mum current rating must be for a given blocking

diode. The minimum power handling capacity must

be calculated based on the constant current ampli-

tude and the diode forward voltage (V_F):

For the best results, it is recommended to physical-

ly place the battery pack as closely as possible to

the AAT3680's BAT pin. To minimize voltage drops

in the PCB, keep the high current carrying traces

adequately wide. For maximum power dissipation

in the pass transistor, it is critical to provide enough

copper to spread the heat. Refer to the AAT3680

demo board PCB layout in Figures 8, 9, and 10.

V_F

P_D(MIN)

I_CC

3680.2006.03.1.6

1...11 12 131415 16 17 18

中文翻译

下载PDF

与AAT3680相关器件

型号	品牌	获取价格	描述	数据表
AAT3680_06	ANALOGICTECH	获取价格	Lithium-Ion/Polymer Linear Battery Charge Controller
AAT3680IKS-4.1-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680IKS-4.2-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680IKS-4.2-T1	AAT	获取价格	Lithium-Ion/Polymer Linear Battery Charge Controller
AAT3680IKS-8.2-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680IKS-8.4-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680ITP-4.1-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680ITP-4.2-T1	AAT	获取价格	Lithium-Ion/Polymer Linear Battery Charge Controller
AAT3680ITP-4.2-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller
AAT3680ITP-8.2-T1	ANALOGICTECH	获取价格	Lithium-Ion Linear Battery Charge Controller

与AAT3680相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

5
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

10
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

4
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

4

产品中心

服务支持

精选活动

关于我们

帮助中心

AAT3680

AAT3680 数据手册

与AAT3680相关器件

与AAT3680相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AAT3680

AAT3680 数据手册

与AAT3680相关器件

与AAT3680相关文章

您还可以找

您在本页遇到什么问题？