AAT3681
USB Port or AC Adapter
Lithium-Ion/Polymer Battery Charger
™
BatteryManager
General Description
Features
The AAT3681 BatteryManager is a member of
AnalogicTech's Total Power Management IC™
(TPMIC™) product family. This product is an inte-
grated single cell lithium-ion/polymer battery charg-
er IC, designed to operate from a DC power source
or USB port up to an input voltage of 6.5V. It requires
just one external component.
•
USB or AC Adapter System Power Charger
— Programmable from 15mA to 300mA
4.0V ~ 6.5V Input Voltage Range
High Level of Integration with Internal:
— Charging Device
— Reverse Blocking Diode
Automatic Current Sensing
Automatic Recharge Sequencing
Full Battery Charge Auto Turn Off/Sleep
Mode/Charge Termination
•
•
•
•
•
The AAT3681 precisely regulates battery charge
voltage and current for 4.2V (4.375V option) lithium-
ion/polymer battery cells. When charged from an
AC adapter or USB port, the battery charging cur-
rent can be set by an external resistor up to 300mA.
•
•
Shutdown Current <1µA
Automatic Trickle Charge for Battery Pre-
Conditioning
Battery charge state is continuously monitored for
fault conditions. In the event of an over-voltage,
short-circuit, or over-temperature failure, the
device will automatically shut down, thus protecting
the charging device, control system, and the bat-
tery under charge. A status monitor output pin is
provided to indicate the battery charge status by
directly driving an external LED.
•
Over-Voltage and Emergency Thermal
Protection
Power On Reset and Soft Start
LED Status Pin
•
•
•
8-Pin 2.0x2.1mm SC70JW Package
Applications
The AAT3681 is available in a Pb-free, thermally
enhanced, space-saving 8-pin 2.0x2.1mm SC70JW
package and is specified for operation over the
-40°C to +85°C temperature range.
•
•
•
•
Bluetooth™ Headsets
DECT Headsets
Digital Still Cameras
MP3, Portable Music, and Portable Media
Players
•
•
•
Personal Data Assistants (PDAs)
Wrist Watches
Other Lithium-Ion/Polymer Battery-Powered
Devices
Typical Application
Adapter/USB Input
ADP
BATT+
BAT
C
AAT3681
BATT-
Battery
Pack
STAT
EN
Enable
ISET
GND
RSET
3681.2006.05.1.1
1