A1365
Low-Noise, High-Precision, Programmable Linear Hall-Effect Sensor IC
With High-Bandwidth (120 kHz) Analog Output and Integrated Fault Comparator
FEATURES AND BENEFITS
DESCRIPTION
• Proprietary segmented linear temperature compensation
(TC) technology provides a typical accuracy of 1% over
the full operating temperature range
The A1365 linear output Hall-effect sensor IC is specifically
designed to provide a highly accurate output with improved
resolution at high bandwidth for use in current-sensing
applications. This device employs a segmented, linearly
interpolated temperature compensation technology, which
provides greater accuracy in sensitivity and offset voltage
trimming and hence virtually zero temperature drift. This
improvementgreatlyreducesthetotalerrorofthedeviceacross
the operating temperature range.
• 120 kHz nominal bandwidth achieved via proprietary
packaging and chopper stabilization techniques
• Over Field Fault signal with 6-bit programmable trigger
levels, 2-bit programmable hysteresis, and latching or
non-latching behavior
• Over Field Fault response time < 4.5 μs (typ)
• Extremely low noise and high resolution achieved via
proprietary Hall element and low-noise amplifier circuits
• Customer-programmable, high-resolution offset and
sensitivity trim
The highly programmable Over Field Fault signal (FAULT
pin) can be used to detect a high magnetic field condition.
Broken ground wire detection, undervoltage lockout for VCC
belowspecification,anduser-selectableoutputvoltageclamps
are also included, which are important for high reliability in
automotive applications. The sensor accuracy and diagnostic
capability make it ideally suited for automotive sockets such
as HEV inverter and DC-to-DC converter applications.
• Available in a 1-mm-thick SIP through-hole package
• Factory-programmed sensitivity and quiescent
output voltage TC with extremely stable temperature
performance
Continued on the next page…
The A1365 Hall-effect sensor IC is extremely sensitive, fast,
and temperature-stable. The accuracy and flexibility of this
device is enhanced by user programmability, performed via
the VCC supply and the output pins, which allows the device
to be optimized in the application.
PACKAGE:
4-Pin SIP (suffix KT)
ThisratiometricHall-effectsensorICprovidesavoltageoutput
thatisproportionaltotheappliedmagneticfield.Thequiescent
outputvoltageisuser-adjustablearound50%(bidirectional)of
Continued on the next page…
Not to scale
V +
(Programming)
VCC
Programming
Control
6-Bit Programmable Window Comparator
VREF(High)
0.88 × VCC to 0.72 × VCC
COMP_IN
–
+
Internal
Pull-Up
6 bits
Temperature
Sensor
EEPROM and
Control Logic
FAULT
–
+
VREF(Low)
CBYPASS
Sensitivity Control
Offset Control
0.12 × VCC to 0.28 × VCC
VOUT
Signal Recovery
GND
(Programming)
Functional Block Diagram
A1365-GS-DS