Datasheet > A1173-MBL

A1173-MBL

更新时间： 2022-12-19 15:16:35

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
8页	80K
描述
SPECIFICATION FOR APPROVAL

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

A1173-MBL 数据手册

SUNON

Notes

1. SUNON will not guarantee the products if the application of our products is exceeded

the limitation which is specified on this specification.

2. In case of change of the specification specified on this document, a written notice is

requested in advance.

3. Please do not touch the impeller with pressure and never bring the fan with lead wire.

The bearings and lead wire may be damaged.

4. No guarantee on the products against the safety problem or failure caused by powder

dust, drop of water or insect.

5. If there is any data or related documentation different from this data sheet, this data

sheet is the principal reference.

6. For the purpose of MIS, please indicate SPEC No. on every order.

7. In case of the fan has no polarity protection function, wires with same color (electrode)

must be connected together during the assembly. (i.e. red + red, black + black)

or the fan will be damaged immediately.

8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental

gas.

9. Please do not store the fan in the environment of high / low temperature, high humidity

or any detrimental gas. Please store the fan within 6 months, every 6 months, there

shall be a leakage of electric current to the fan, even though the fan is stored in room

temperature.

10.While the fan is in operation, please do not lock the fan intentionally for a long period of

time, since the continuous stoppage will result in over-heat and damage of the fan.

11.During the installation of the fan, please pay substantial attention to possible noise

cause by resonance vibration and vibration.

12.During the testing of the fan, please be sure to use finger guard to insure safety.

13.Unless otherwise specified, if there is any doubt in the judgement, the temperature and

relative humidity range of environment will be take in according to the standard test

℃

condition as 25 and 65%.

SPEC. NO.

A170028 REVISE DATE

建準電機工業股份有限公司

ISSUE DATE 06. 22. 2001 E D I T I O N

SUNONWEALTH ELECTRIC

MACHINE INDUSTRY CO., LTD.

P A G E

7 OF 7

1...5 6 78

下载PDF

与A1173-MBL相关器件

型号	品牌	描述	获取价格	数据表
A1173-MBT	ETC	SPECIFICATION FOR APPROVAL	获取价格
A1173-MSL	ETC	SPECIFICATION FOR APPROVAL	获取价格
A1173-MST	ETC	SPECIFICATION FOR APPROVAL	获取价格
A1174	ALLEGRO	Ultrasensitive Hall Effect Latch with Internally or Externally Controlled Sample and Sleep	获取价格
A1174EEWLT-T	ALLEGRO	Hall Effect Sensor, -5.5mT Min, 5.5mT Max, 300mV, Rectangular, Surface Mount, 1.50 X 2 MM,	获取价格
A1175-HBL	ETC	SPECIFICATION FOR APPROVAL	获取价格