Datasheet > A000066

A000066

更新时间： 2022-09-27 10:29:27

品牌	Logo	应用领域
爱特美尔 - ATMEL		闪存微控制器
页数	文件大小	规格书
448页	12817K
描述
8-bit Microcontroller with 4/8/16/32K Bytes In-System Programmable Flash

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

A000066 数据手册

ATmega48PA/88PA/168PA/328P

1.1

Pin Descriptions

1.1.1

VCC

Digital supply voltage.

1.1.2

1.1.3

GND

Ground.

Port B (PB7:0) XTAL1/XTAL2/TOSC1/TOSC2

Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The

Port B output buffers have symmetrical drive characteristics with both high sink and source

capability. As inputs, Port B pins that are externally pulled low will source current if the pull-up

resistors are activated. The Port B pins are tri-stated when a reset condition becomes active,

even if the clock is not running.

Depending on the clock selection fuse settings, PB6 can be used as input to the inverting Oscil-

lator amplifier and input to the internal clock operating circuit.

Depending on the clock selection fuse settings, PB7 can be used as output from the inverting

Oscillator amplifier.

If the Internal Calibrated RC Oscillator is used as chip clock source, PB7..6 is used as TOSC2..1

input for the Asynchronous Timer/Counter2 if the AS2 bit in ASSR is set.

The various special features of Port B are elaborated in ”Alternate Functions of Port B” on page

82 and ”System Clock and Clock Options” on page 26.

1.1.4

1.1.5

Port C (PC5:0)

Port C is a 7-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The

PC5..0 output buffers have symmetrical drive characteristics with both high sink and source

capability. As inputs, Port C pins that are externally pulled low will source current if the pull-up

resistors are activated. The Port C pins are tri-stated when a reset condition becomes active,

even if the clock is not running.

PC6/RESET

If the RSTDISBL Fuse is programmed, PC6 is used as an I/O pin. Note that the electrical char-

acteristics of PC6 differ from those of the other pins of Port C.

If the RSTDISBL Fuse is unprogrammed, PC6 is used as a Reset input. A low level on this pin

for longer than the minimum pulse length will generate a Reset, even if the clock is not running.

The minimum pulse length is given in Table 28-3 on page 318. Shorter pulses are not guaran-

teed to generate a Reset.

The various special features of Port C are elaborated in ”Alternate Functions of Port C” on page

85.

1.1.6

Port D (PD7:0)

Port D is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit). The

Port D output buffers have symmetrical drive characteristics with both high sink and source

capability. As inputs, Port D pins that are externally pulled low will source current if the pull-up

resistors are activated. The Port D pins are tri-stated when a reset condition becomes active,

even if the clock is not running.

8161D–AVR–10/09

1 234 5 6 7...448

下载PDF

与A000066相关器件

型号	品牌	描述	获取价格	数据表
A000067	ATMEL	8-bit Atmel Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash	获取价格
A0009-AL	COILCRAFT	Flyback Transformer	获取价格
A0009-ALB	COILCRAFT	SMPS Transformer, ROHS COMPLIANT	获取价格
A0009-ALD	COILCRAFT	SMPS Transformer, ROHS COMPLIANT	获取价格
A00-108-260-450	ETC	Top performance for high speed networking	获取价格
A00-108-620-450	ETC	Top performance for high speed networking	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

A000066

A000066 数据手册

与A000066相关器件

与A000066相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

A000066

A000066 数据手册

与A000066相关器件

与A000066相关文章

您还可以找

您在本页遇到什么问题？