11.3 Gbps Active Back-Termination,
Differential Laser Diode Driver
ADN2526
FEATURES
GENERAL DESCRIPTION
3.3 V operation
Up to 11.3 Gbps operation
Typical 24 ps rise/fall times
The ADN2526 laser diode driver is designed for direct modula-
tion of packaged laser diodes that have a differential resistance
ranging from 5 Ω to 50 Ω. The active back-termination in the
ADN2526 absorbs signal reflections from the TOSA end of the
output transmission lines, enabling excellent optical eye quality to
be achieved even when the TOSA end of the output transmission
lines is significantly misterminated. ADN2526 is an SFP+ MSA-
compliant device, and its small package and enhanced ESD
protection provide the optimum solution for compact modules
where laser diodes are packaged in low pin-count optical
subassemblies.
Full back-termination of output transmission lines
Drives TOSAs with resistances ranging from 5 Ω to 50 Ω
Bias current range: 10 mA to 100 mA
Differential modulation current range: 10 mA to 80 mA
Voltage input control for bias and modulation currents
Data inputs sensitivity: 150 mV p-p diff
Automatic laser shutdown (ALS)
Cross point adjustment (CPA)
XFP-compliant bias current monitor
SFP+ MSA compliant
The modulation and bias currents are programmable via the
MSET and BSET control pins. By driving these pins with control
voltages, the user has the flexibility to implement various
average optical power and extinction ratio control schemes,
including closed-loop or look-up table control. The automatic
laser shutdown (ALS) feature allows the user to turn on/off the
bias and modulation currents by driving the ALS pin with a
LVTTL logic source.
Optical evaluation board available
Compact 3 mm × 3 mm LFCSP
APPLICATIONS
SONET OC-192 and SDH STM-64 optical transceivers
10 Gb Fibre Channel transceivers
10 Gb Ethernet optical transceivers
SFP+/XFP/X2/XENPAK/XPAK/MSA 300 optical modules
The product is available in a space-saving 3 mm × 3 mm LFCSP
specified from −40°C to +85°C.
FUNCTIONAL BLOCK DIAGRAM
VCC
CPA
ALS
VCC
ADN2526
VCC
IMODP
IMODN
50Ω
50Ω
50Ω
IMOD
VCC
GND
DATAP
DATAN
CROSS
POINT
ADJUST
IBMON
IBIAS
800Ω
800Ω
200Ω
200Ω
200Ω
2Ω
MSET
VEE
BSET
Figure 1.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2009 Analog Devices, Inc. All rights reserved.