Datasheet > 61-036/GBRSB7W-B06/ET

61-036/GBRSB7W-B06/ET

更新时间： 2024-01-10 16:57:24

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

61-036/GBRSB7W-B06/ET 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	包装说明：	ROHS COMPLIANT PACKAGE-6
Reach Compliance Code：	compliant	HTS代码：	8541.40.20.00
风险等级：	5.79	颜色：	BRILLIANT RED/BRILLIANT GREEN/BLUE
配置：	SEPARATE, 3 ELEMENTS	最大正向电流：	0.05 A
透镜类型：	DIFFUSED WHITE	标称发光强度：	610.0/1257.5/422.5 mcd
安装特点：	SURFACE MOUNT	功能数量：	1
端子数量：	6	最高工作温度：	85 °C
最低工作温度：	-40 °C	光电设备类型：	TRIPLE COLOR LED
总高度：	1.5 mm	包装方法：	TAPE AND REEL
峰值波长：	632/518/468 nm	形状：	ROUND
表面贴装：	YES	端子节距：	4.2 mm
视角：	120 deg

EVERLIGHT ELECTRONICS CO., LTD.

Technical Data Sheet - Preliminary

Luminosity Full Color LED

61-036/GBRSB7W-B06/ET

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time

of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No. :

http://www.everlight.com

Prepared date: 21-Sep-2007

Rev. 1.1

Page: 14 of 14

Prepared by: Josh Chou

1...12 13 1415

下载PDF