QUARTZ
EURO
G14 VCXO
14 pin Dual-in-Line
625.0kHz ~ 50.0MHz
Page 1 of 2
Industry-standard 14 pin DIL package
Frequency range 625kHz to 50.0MHz
CMOS/TTL Output
Supply Voltage 1.8, 2.5, 3.3 or 5.0VDC
Integrated Phase Jitter 1ps maximum
DESCRIPTION & APPLICATIONS
G14 VCXOs are packaged in the industry-standard 14 pin Dual-in-Line
package. G series VCXOs use fundamental mode crystal oscillators for
low phase noise. Applications include phase lock loop, SONET/ATM,
set-top boxes, MPEG , audio/video modulation, video game consoles,
Fibre Channel, FPGAs, Data Acquisition and HDTV.
SUPPLY VOLTAGE-DEPENDENT SPECIFICATION
Input Voltage (Vdd):
Frequency Range*:
Vdd = +1.8VDC ±5% Vdd = +2.5VDC ±5% Vdd = +3.3VDC ±5% Vdd = +5.0VDC ±10%
16.0MHz ~ 50.0MHz 0.625MHz ~ 50.0MHz 0.625MHz ~ 50.0MHz
1.0MHz ~ 50.0MHz
TTL/CMOS
Output Waveform:
TTL/CMOS
TTL/CMOS
TTL/CMOS
Initial Frequency Accuracy:
To tune to nominal fr.
with Vc=0.9±0.15V
To tune to nominal fr.
with Vc=1.25±0.2V
To tune to nominal fr.
with Vc=1.65±0.2V
To tune to nominal fr.
with Vc=2.5±0.2V
TTL:
CMOS:
TTL:
- - - -
1.62V (min.)
- - - -
- - - -
2.25V (min.)
- - - -
2.4V (min.)
2.97V (min.)
0.4V (max.)
0.33 (max.)
2.4V (min.)
4.5V (min.)
0.4V (max.)
0.5V (max.)
Output Logic HIGH '1'
Output Logic LOW '0'
CMOS:
0.183V (max.)
0.25V (max.)
Frequency Deviation Range:
Standard: ±80ppm
(min.)
Standard: ±80ppm
(min.)
Standard: ±80ppm
(min.)
Std: ±80ppm (min.)
±200ppm available
Control Voltage Centre
Control Voltage Range:
0.9VDC
1.25VDC
1.62VDC
2.5VDC
0V to 1.8V
025V to 2.25V
0.3V to 3.0V
0.5V to 1.5V
GENERAL SPECIFICATION
OUTLINE & DIMENSIONS
Frequency Stability:
Frequency Change
vs. Input Voltage:
Input Voltage:
See table
DD
±5ppm max. (V ±5%)
+1.8V±5%, +2.5V±5%,
+3.3V±5% or 5.0V±10%
Output Load
TTL:
2TTL gates
15pF
CMOS:
Rise/Fall Time
TTL:
6ns max, 4ns typ. (0.4V to 2.4V)
6ns max, 4ns typ. (20%~80% Vdd)
50±10% standard, 50±5% option
1ps maximum (12kHz to 20MHz)
2.0ps typical
CMOS:
Duty Cycle:
Integrated Phase Jitter:
Period Jitter RMS:
Period Jitter Peak to Peak:
Start-up time:
Current Consumption:
14ps
10ms max., 3ms typical
10 to 45mA, frequency dependant
(27MHz: 10mA typical at 3.3V,
20mA typical at 5.0VDC)
6% typical, 10% maximum
10kHz min., measured at Vcont =
1.65V or2.5V.
Linearity:
Modulation Bandwidth:
Input Impedance:
1MΩ typical
Slope Polarity:
Monotonic and Positive, increasing
control voltage increases output
frequency.
Ageing:
RoHS Status:
±3ppm per year maximum
RoHS Compliant and lead (Pb) free
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk