Datasheet > 5962-8979501QXC

5962-8979501QXC

更新时间： 2024-01-11 03:57:15

品牌	Logo	应用领域
其他 - ETC		驱动器逻辑集成电路
页数	文件大小	规格书
17页	76K
描述
Buffer/Driver

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

5962-8979501QXC 技术参数

生命周期：	Obsolete	零件包装代码：	DFP
包装说明：	DFP, FL20,.3	针数：	20
Reach Compliance Code：	unknown	HTS代码：	8542.39.00.01
风险等级：	5.59	控制类型：	ENABLE LOW
系列：	ACT	JESD-30 代码：	R-XDFP-F20
JESD-609代码：	e4	长度：	12.955 mm
负载电容（CL）：	50 pF	逻辑集成电路类型：	BUS DRIVER
最大I（ol）：	0.024 A	位数：	8
功能数量：	1	端口数量：	2
端子数量：	20	最高工作温度：	125 °C
最低工作温度：	-55 °C	输出特性：	3-STATE
输出极性：	TRUE	封装主体材料：	UNSPECIFIED
封装代码：	DFP	封装等效代码：	FL20,.3
封装形状：	RECTANGULAR	封装形式：	FLATPACK
电源：	5 V	Prop。Delay @ Nom-Sup：	8 ns
传播延迟（tpd）：	8 ns	认证状态：	Not Qualified
筛选级别：	MIL-PRF-38535 Class V	座面最大高度：	2.16 mm
子类别：	Bus Driver/Transceivers	最大供电电压 (Vsup)：	5.5 V
最小供电电压 (Vsup)：	4.5 V	标称供电电压 (Vsup)：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	MILITARY	端子面层：	GOLD
端子形式：	FLAT	端子节距：	1.27 mm
端子位置：	DUAL	宽度：	7.115 mm
Base Number Matches：	1

5962-8979501QXC 数据手册

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.2.3 Truth table. The truth table shall be as specified on figure 3.

3.2.4 Logic diagram. The block or logic diagram shall be as specified on figure 4.

3.2.5 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 5.

3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the

electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full

case operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be

marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to space

limitations, the manufacturer has the option of not marking the "5962-" on the device. For RHA product using this option, the

RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535.

Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A.

3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in

MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.

3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535

listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of

compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see

6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this

drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535

and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.

3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for

device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.

3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2

herein) involving devices acquired to this drawing is required for any change as defined in MIL-PRF-38535, appendix A.

3.9 Verification and review for device class M. For device class M, DSCC, DSCC's agent, and the acquiring activity retain

the option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.

3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

microcircuit group number 37 (see MIL-PRF-38535, appendix A).

SIZE

STANDARD

5962-89795

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

REVISION LEVEL

SHEET

DSCC FORM 2234

APR 97

1 2 3 456 7 8...17

下载PDF

与5962-8979501QXC相关器件

型号	品牌	描述	获取价格	数据表
5962-8979501VXA	ETC	Buffer/Driver	获取价格
5962-8979501VXC	ETC	Buffer/Driver	获取价格
5962-8979801XA	ETC	MIL-STD-1553/ARINC Bus Controller/RTU	获取价格
5962-8979801XC	ETC	MIL-STD-1553/ARINC Bus Controller/RTU	获取价格
5962-8979801YA	ETC	MIL-STD-1553/ARINC Bus Controller/RTU	获取价格
5962-8979801YC	ETC	MIL-STD-1553/ARINC Bus Controller/RTU	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

5962-8979501QXC

5962-8979501QXC 技术参数

5962-8979501QXC 数据手册

与5962-8979501QXC相关器件

与5962-8979501QXC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

5962-8979501QXC

5962-8979501QXC 技术参数

5962-8979501QXC 数据手册

与5962-8979501QXC相关器件

与5962-8979501QXC相关文章

您还可以找

您在本页遇到什么问题？