TYPE 595D
Solid Tantalum Chip Capacitors
®
TANTAMOUNT , Conformal Terminals, Maximum C/V
FEATURES
• New extended range offerings.
• New lower ESR reading.
• Largest capacitance rating in the industry.
• Compatible with 293D molded chip mounting pad layout.
• Terminations: 60/40 Tin Lead (2) standard (Electroplate
or solder dip).
• 8mm, 12mm tape available per EIA-481-1 and reeling per
IEC 286-3. 7" [178mm] standard. 13" [330mm] available.
• Operating temperature: - 55°C to + 125°C.
• Case code compatibility with EIA 535BAAC and CECC
30801 molded chips.
P ERFORMANCE CHARACTERIS TICS
At + 125°C: Leakage current shall not exceed 12 times
the values listed in the Standard Ratings Tables.
Operating Temperature: - 55°C to + 85°C. (To + 125°C
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85°C for 2000 hours or derated DC voltage
applied at + 125°C for 1000 hours.
with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25°C. ± 20%
standard. ± 10% available.
Following the life test:
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor,
as determined from the expression 2πfRC, shall not
exceed the values listed in the Standard Ratings Tables.
1. DCL shall meet the original requirement.
2. Dissipation factor and ESR shall meet the original
requirement.
DC Leakage Current (DCL Max.):
At + 25°C: Leakage current shall not exceed the
values listed in the Standard Ratings Tables.
3. Change in capacitance shall not exceed ± 10%.
ELECTRICAL CHARACTERIS TICS @ + 2 5 °C
DCL: .01µA/CV or .5µA whichever is greater.
DF: 4% ≤ 1µF, 6% > 1µF < 100µF, 8% ≥ 100µF < 560µF,
10% 560µF & 680µF, 16% 1000µF, 20% 1500µF.
At + 85°C: Leakage current shall not exceed 10 times
the values listed in the Standard Ratings Tables.
DIMENS IONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]
W
Tantalum Wire Nib
Identifies Anode (+)
Terminal
L
B
J
J
D
A
H
CASE
CODE
L (Max.)
W
H
A
B
D (Ref.)
J (Max.)
T
A
B
C
D
R
.087
[2.2]
.045 ± .010
[1.1 ± 0.3]
.045 ± .010
[1.1 ± 0.3]
.016 ± .008
[.4 ± 0.2]
.042 ± .010
[1.07 ± 0.25]
.063
[1.6]
.004
[0.1]
.146
[3.7]
.072 ± .010
[1.8 ± 0.3]
.056 ± .012
[1.4 ± 0.3]
.031 ± .012
[.80 ± .30]
.085 ± .015
[2.2 ± 0.4]
.115
[2.9]
.004
[0.1]
.158
[4.0]
.110 + .010 - .016
[2.8 + 0.3 - 0.4]
.075 + .012 - .025
[1.9 + 0.3 - 0.6]
.031 ± .012
[.80 ± .30]
.097 ± .015
[2.5 ± 0.4]
.138
[3.5]
.004
[0.1]
.281
[7.1]
.126 ± .010
[3.2 ± 0.3]
.098 ± .012
[2.5 ± 0.3]
.051 ± .017
[1.3 ± .30]
.180 ± .025
[4.6 ± 0.6]
.236
[6.0]
.004
[0.1]
.293
[7.5]
.170 ± .010
[4.3 ± 0.3]
.110 ± .012
[2.8 ± 0.3]
.051 ± .017
[1.3 ± .30]
.180 ± .025
[4.6 ± 0.6]
.253
[6.4]
.004
[0.1]
.283
[7.2]
.235 ± .010
[6.0 ± 0.3]
.136 ± .012
[3.5 ± 0.3]
.051 ± .017
[1.3 ± .30]
.180 ± .025
[4.6 ± 0.6]
.243
[6.2]
.004
[0.1]
Note: The anode termination (D less B) will be a minimum of .010" [0.3mm]. T Case = .005" [.13mm] minimum.
Vishay Sprague 70 Pembroke Road, Concord, NH 03301 • Phone (603) 224-1961 • Fax 603-224-1430 • Internet www.vishay.com
Major Vishay Brands Dale • Draloric • Foil Resistors • Measurements Group • Roederstein • Sfernice • Sprague • Thin Film • Vitramon
46