Datasheet > 540PG2C

540PG2C

更新时间： 2022-04-23 23:00:11

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

540PG2C 数据手册

LED LAMP APPLICATION

3) Similarly, when a jig is used to solder the LED to PC board, take care as much as possible to

avoid steering the leads (See Fig.3).

ꢀ

PC board

（Fig.）3

jig

4) Repositioning after soldering should be avoided as much as possible. If inevitable, be sure to

preserve the soldering conditions with irons stated above: select a best-suited method that

assures the least stress to the LED.

5) Lead cutting after soldering should be performed only after the LED temperature has returned to

normal temperature.

yLED MOUNTING METHOD

1) When mounting the LED by using a case, as shown Fig.4, ensure that the mounting holds on

the PC board match the pitch of the leads correctly-tolerance of dimensions of the respective

components including the LED should be taken into account especially when designing the

case, PC board, etc. to prevent pitch misalignment between the leads and board holes, the

diameter of the board holes should be slightly larger than the size of the lead. Alternatively, the

shape of the holes should be made oval. (See Fig.4)

case

pc board

Fig.4

Page : 6

1...3 4 567 8 9

下载PDF

型号	品牌	描述	获取价格	数据表
540PR2C	HB	LED SPECIFICATION	获取价格
540PWC	HB	5MM LED	获取价格
540PY9C	HB	LED	获取价格
540R2GBC-CA	HB	5.0 mm DIA LED LAMP	获取价格
540R2GBC-CC	HB	5.0 mm DIA LED LAMP	获取价格
540S31000	JDSU	1536/1554 nm 3-Port Bandpass Wavelength Division Multiplexers	获取价格