5000 series
Toggle switches
Specifications
ELECTRICAL SPECIFICATIONS
• Current/voltage rating with resistive load :
Contact
Silver (A)
Silver,
Maximum
3A 250VAC - 6A 125VAC - 4A 30VDC
3A 250VAC - 6A 125 VAC - 4A 30VDC
Minimum
Level*
III and IV
I to IV
50mA 10VDC
10mA 50mV
10µA 5V
A
gold plated (AD) Gold plating withstands up to 100mA 30VDC
Brass,
gold plated (CD)
0,4 VA at 20VAC or DC
10mA 50mV
10µA 5V
I and II
• For inductive, lamp or capacitive load, consult factory.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
* For details, see Technical Information, end of catalogue.
1.000 Vrms 50 Hz min. between terminals
1.500 Vrms 50 Hz min. between poles
1.500 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
50.000 cycles for single and double pole
40.000 cycles for 3 pole
30.000 cycles for 4 pole
• Low level or mechanical life : 100.000 cycles
MATERIALS
GENERAL SPECIFICATIONS
• Case : diallylphthalate (DAP) or
high temperature plastic material
(UL94-V0)
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
• Operating temperature : -40°C to +85°C
•Actuator : brass, chrome plated
•Bushing : brass, nickel plated
• Housing : stainless steel or steel
tin plated
AGENCY APPROVALS/PREFERENTIAL LISTS
• Contacts
A : silver
CECC 96201-007
AD : silver, gold plated
CD : brass, gold plated
X814 : for peak currrents, see
section G.
• Terminal seal : epoxy
•Paddles : UL94HB polyamide
• Lever caps : vinyl
EN 61058-1
For VDE, refer to 55000 series.
QPL (Europe only)
MUAHAG
NATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriate
box of ordering format.
Preferential lists do not appear on the switches.
APEM
www.apem.com
A-23