W O R L D L E A D E R I N S E N S I N G S O L U T I O N S
Product Bulletin
25PS, 42PS, 44PS, 45PS and 46PS
Series Pressure Switches
for 2.5 million cycles.† In applica-
tions such as split room air condi-
tioning systems, the 46PS as a head
pressure control can result in signifi-
cant cost savings when used instead
of a pilot duty switch and relay.
able in SPST and SPDT, offers a
variety of pressure settings, port
fittings and electrical connections.
Key Features
• SPST or SPDT switch with normally
open or closed contacts
Ap p lic a t io n s
• Electrically rated to 600 Vac (44/45PS)
• High cycle life capability (42/44PS)
This line of pressure switches is
designed for direct control of
motors and other demanding loads
requiring precise pressure settings.
Op e ra t io n
• Factory calibrated pressure setpoints
from vacuum to 750 psig
The snap-acting stainless steel
diaphragm reverses its curvature
when pressurized to a customer
specified value. When the disc
snaps, it opens or closes a set of
electrical contacts by means of a
transfer pin. Resetting the switch
occurs automatically when pressure
drops below a preset value.
• Snap-acting stainless steel
hermetically sealed sensor
Extended electrical capacities and
life cycles, in both environmentally
sealed and unsealed configurations,
encourage usage in the most rigor-
ous fan cycling and high/low
• Available with environmentally
sealed switch
• High current capability
pressure protection applications.
The 25PS series is an automatic
reset pressure switch designed to
meet a broad variety of application
requirements. This series is avail-
The 46PS pressure switch is capable
of breaking 2 amp loads at 480 Vac
P ro d u c t S e le c t io n Ma t rix
Switch Life
Cycles
Application
Voltage
Environmental
Package
Model Number – Termination
Sealed
44PS - Wire Leads
480 - 600 Vac
Unsealed
Sealed
44PS - 1/4” Quick Connects
44PS - Wire Leads
250,000
100,000
28 Vdc - 240 Vac
Unsealed
42PS - Wire Leads or 1/4” Quick Connects
45PS - Wire Leads
Sealed
480 - 600 Vac
45PS - 1/4” Quick Connects
45PS - Wire Leads
Unsealed
Sealed
28 Vdc - 240 Vac
Unsealed
25PS - Wire Leads or 1/4” Quick Connects
46PS - Wire Leads
Sealed
480 Vac
46PS - Wire Leads or 1/4” Quick Connects
46PS - Wire Leads
Unsealed
Sealed
2,500,000†
120 Vac - 240 Vac
46PS - Wire Leads or 1/4” Quick Connects
Unsealed
†Qualified by application current. Requires TI/customer specification closure and validation testing before application approval.