Datasheet > 4077172011

4077172011

更新时间： 2024-02-10 07:40:49

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

4077172011 数据手册

Rods (4077122011)

Part Number: 4077122011

77 ROD

Explanation of Part Numbers:

– Digits 1 & 2 = Product Class

– Digits 3 & 4 = Material Grade

Pressed Fair- Rite rods are used extensively in high- energy storage designs.

These rods can also be used for inductive components that require temperature stability or have to accommodate large dc bias

requirements.

Figure 2 rods have a 0.6 mm (0.024 ) maximum chamfer on the end faces.

For frequency tuned rod designs see section Antenna/ RFID Rods .

For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing.

The

dimension can be centerless ground to tighter tolerances.

Weight: 1 (g)

Dim mm mm tol

nominal inch

inch misc.

3.25 -0.25

25.4 ±0.75

0.125

Figure 1 shows the rod permeability as a function of the length to diameter ratio for the six materials available in rods.

Figures 3, 4 and 5 illustrate typical temperature behavior of wound rods. Would rods in 33 and 77 material yield the best

temperature stable inductors, see Figure 4. Both show a typical inductance change of <1% over the -40° to 120°C

temperature range. The parts have a L/ D ratio of 8.1. Lower ratios will change less. This is shown in detail in Figure 5 for

the same 52 material but with the L/ D ratio as the parameter. A lower ratio means a lower rod permeability but with

improved temperature stability.

12 3

中文翻译

下载PDF