5秒后页面跳转
3D8W4_2405D1.6RP PDF预览

3D8W4_2405D1.6RP

更新时间: 2024-01-07 20:30:44
品牌 Logo 应用领域
GAPTEC /
页数 文件大小 规格书
4页 545K
描述
3Watt - 4:1 Regulated Single & Dual output

3D8W4_2405D1.6RP 数据手册

 浏览型号3D8W4_2405D1.6RP的Datasheet PDF文件第2页浏览型号3D8W4_2405D1.6RP的Datasheet PDF文件第3页浏览型号3D8W4_2405D1.6RP的Datasheet PDF文件第4页 
3D8W4_1.6RP series  
3Watt - 4:1 Regulated Single & Dual output  
DC-DC Converter  
3 Watt  
The 3D8W4_1.6RP series is a family of cost effective and high performanced  
3W single & dual output DC-DC converters. These converters are built in non-  
conductive black plastic package in a 8-pin DIL miniature compact case with high  
performance features wide range devices operate over 4:1 input voltage range  
providing stable output voltage. Devices are encapsulated using flame retardant  
resin. Input voltages of 12, 24, 48 Vdc with output voltage of 3.3, 5, 12, 15, 5, 12,  
15 Vdc. High performance features include high efficiency operation up to 84%  
and output voltage accuracy of 1% maꢀimum.  
Wide input range (4:1)  
Highest Power Density in  
8 Pin DIL Package  
Short circuit protection (SCP)  
Operating temperature  
range: -40°C ~ +80°C  
Remote on/off Control  
Under Voltage Lock-Out  
Circuit  
1.6kVDC isolation  
Efficiency up to 84%  
Full SMD Technology  
Output specifications  
Voltage accuracy  
1%  
Maꢀimun Output Current  
See table  
No load output voltage accuracy  
%
Common specifications  
Efficiency  
Line regulation  
0.2%,maꢀ.  
See table,typ.  
Load regulation  
(From 0% to 100% Load) 1.0%,maꢀ.  
5%  
Short circuit protection:  
Cooling:  
Indefinite  
Cross Regulation (Dual Output)(1)  
Nature Convection  
-40°C~+80°C  
Ripple & Noise (20 MHz bandwidth)(2) Single 150mVpp,maꢀ.  
Dual 100mVpp,maꢀ.  
Operation temperature range:  
Storage temperature:  
Storage humidity range:  
-55°C~+125°C  
Temperature Coefficient  
Capacitive Load(3)  
0.02%/°C  
< 95% reIH  
See table  
500us, typ.  
3%, maꢀ.  
Pin soldering resistance tem-  
perature:  
300°C MAX, 1.5mm away from case for 10s.  
Transient Recovery Time (4)  
Transient response deviation(4)  
Case material:  
Non conductive black plastic  
(UL94V-0 rated)  
Single Output 3.3V, 5V: 5%, maꢀ.  
MTBF (MIL-HDBK-217F@25°C):  
Weight:  
>820,000 hours  
3.6g  
EMC specifications  
Switing Frqeunchecy  
100kHz,min.  
CE(8)  
RE  
EN55032  
CLASSA  
EN55032  
CLASSA  
Input specifications  
ESD  
IEC61000-4-2  
IEC61000-4-3  
IEC61000-4.4  
IEC61000-4-5  
IEC61000-4-6  
IEC61000-4-8  
perf. Criteria A  
perf. Criteria A  
perf. Criteria A  
perf. Criteria A  
perf. Criteria A  
perf. Criteria A  
Voltage Range  
See table  
RS  
Start up Time (Nominal Vin and constant resis-  
tive load)  
30mS, typ.  
EFT(9)  
Surge(9)  
CS  
Input Current  
See table  
See table  
Capacitor  
20mA pk-pk  
No-Load Input Current  
Input Filter  
PFMF  
Input Reflected Ripple Current(5)  
Example:  
3D8W4_1205S1.6RP  
3 = 3Watt; D8 = DIP8; W4 = Wide input (4:1); 12 = 12Vin; 05 = 5Vout;  
S = Single output; 1.6= 1.6kVDC; R= Regulated output; P= Short circuit  
protection  
Remote on/off  
ON:  
OFF:  
open or high impedance  
2-4mA input current (via 1K)  
2.5mA, maꢀ.  
Off stand by input current (Nominal Vin)  
Under Voltage Lockout  
12V Modes Module ON / OFF  
24V Modes Module ON / OFF  
48V Modes Module ON / OFF  
4.2Vdc / 3.5Vdc, typ.  
8.5Vdc / 7.0Vdc, typ.  
17.5Vdc / 15.5Vdc, typ.  
Note:  
1. One load is 25% to 100% load, the other load is 100% load, the output voltage  
variable rate is within 5%.  
2. Ripple/Noise measured with a 10μF electrolytic capacitor and 0.1μF ceramic  
capacitor.  
3. Test by minimal Vin and constant resistive load.  
Isolation specifications  
4. Test by normal Vin and 100%-25% load,25% Ioad step change.  
5. Measured Input reflected ripple current with a simulated source inductance of  
27μH and a source capacitor Cin (47μF, ESR<1.0Ω .  
Isolation voltage  
1600VDC  
Isolation resistance  
Isolation capacitance  
500VDC 1000 MΩ  
1000M Ohm,min.  
6. “Nature Convection“ is usually about 30-65 LFM but is not equal to still  
air (0 LFM).  
7. Eꢀceeding the absolute ratings of the unit could cause damage. It‘s not allowed  
for continuous operating ratings.  
8. Input filter components are required to help meet conducted emission class A,  
Which application refer to the EMI Filter(Conduct ).  
9. An eꢀternal filter capacitor is required if the module has to meet IEC61000-4-4  
and IEC61000-4-5. The filter capacitor Motien suggest: Nippon - chemi - con KY  
series, 220μF/100V.  
Page 1 of 4  
3D8W4_1.6RP – Rev. 2020-1.0  
Specifications subject to change without notice.  
GAPTEC-Electronic GmbH & Co. KG  
sales@gaptec-electronic.com – www.gaptec-electronic.com  

与3D8W4_2405D1.6RP相关器件

型号 品牌 获取价格 描述 数据表
3D8W4_2405S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_2412D1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_2412S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_2415D1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_2415S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_243R3S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_4805D1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_4805S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_4812D1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output
3D8W4_4812S1.6RP GAPTEC

获取价格

3Watt - 4:1 Regulated Single & Dual output