Delta39K™ ISR™
CPLD Family
figure the devices without having design changes cause
pinout or timing changes in most cases. The Cypress ISR
function is implemented through a JTAG-compliant serial
interface. Data is shifted in and out through the TDI and TDO
pins respectively. Superior routability, simple timing, and the
ISR allows users to change existing logic designs while simul-
taneously fixing pinout assignments and maintaining system
performance.
Global Routing Description
The routing architecture of the Delta39K is made up of
horizontal and vertical (H and V) routing channels. These
routing channels allow signals from each of the Delta39K
architectural components to communicate with one another. In
addition to the horizontal and vertical routing channels that
interconnect the I/O banks, channel memory blocks, and logic
block clusters, each LBC contains a Programmable Inter-
connect Matrix (PIM™), which is used to route signals
among the logic blocks and the cluster memory blocks.
The entire family features JTAG for ISR and boundary scan,
and is compatible with the PCI Local Bus specification,
meeting the electrical and timing requirements. The Delta39K
family also features user programmable bus-hold and slew
rate control capabilities on each I/O pin.
Figure 2 is a block diagram of the routing channels that
interface within the Delta39K architecture. The LBC is exactly
the same for every member of the Delta39K CPLD family.
AnyVolt Interface
Logic Block Cluster (LBC)
All Delta39KV devices feature an on-chip regulator, which
accepts 3.3V or 2.5V on the VCC supply pins and steps it down
to 1.8V internally, the voltage level at which the core operates.
The Delta39K architecture consists of several logic block
clusters, each of which have eight Logic Blocks (LB) and two
cluster memory blocks connected via a Programmable Inter-
connect Matrix (PIM) as shown in Figure 3. Each cluster
memory block consists of 8-Kbit single-port RAM, which is
configurable as synchronous or asynchronous. The cluster
memory blocks can be cascaded with other cluster memory
blocks within the same LBC as well as other LBCs to
implement larger memory functions. If a cluster memory block
is not specifically utilized by the designer, Cypress’s Warp
software can automatically use it to implement large blocks of
logic.
With Delta39K’s AnyVolt technology, the I/O pins can be
connected to either 1.8V, 2.5V, or 3.3V. All Delta39K devices
are 3.3V-tolerant regardless of VCCIO or VCC settings.
Table 1.
Device
VCC
VCCIO
39KV
3.3V or 2.5V
3.3V or 2.5V or 1.8V or 1.5V[5]
All LBCs interface with each other via horizontal and vertical
routing channels.
I/O Block
LB
LB
LB
LB
LB
LB
LB
LB
72
64
Cluster
PIM
Channel memory
outputs drive
dedicated tracks in the
horizontal and vertical
routing channels
Channel
Memory
Block
Cluster
Memory
Block
Cluster
Memory
Block
72
64
H-to-V
PIM
V-to-H
PIM
Pin inputs from the I/O cells
drive dedicated tracks in the
horizontal and vertical routing
channels
Figure 2. Delta39K Routing Interface
Note:
5. For HSTL only.
Document #: 38-03039 Rev. *H
Page 4 of 86
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
