ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Supply Voltage at VS1 and VS2
Normal Operation (DC)
V
V
-0.3 to 27
-0.3 to 40
SUP(SS)
VSUP(PK)
Transient Conditions (load dump)
Supply Voltage at VDD
VDD
-0.3 to 5.5
V
V
Input / Output Pins Voltage(5)
V
-0.3 to VDD +0.3
CS, RST, SCLK, PWMIN, ADOUT0, MOSI, MISO, TXD, RXD
IN
Interrupt Pin (IRQ)(6)
V
-0.3 to 11
-0.3 to VSUP +0.3
-0.3 to 45
IN(IRQ)
HS1 Pin Voltage (DC)
V
V
V
V
HS1
LS1 and LS2 Pin Voltage (DC)
V
LS
L1 and L2 Pin Voltage
V
-18 to 40
±100
Normal Operation with a series 33kΩ resistor (DC)
LxDC
V
Transient input voltage with external component (according to ISO7637-2)
(See Figure 5, page 16)
LxTR
VSENSE Pin Voltage (DC)
VVSENSE
-27 to 40
V
V
LIN Pin Voltage
VBUSDC
VBUSTR
-18 to 40
Normal Operation (DC)
-150 to 100
Transient input voltage with external component (according to ISO7637-2)
(See Figure 4, page 16)
VDD output current
I
Internally Limited
A
V
VDD
ESD Voltage
V
V
±8000
±2000
±200
Human Body Model - LIN Pin(7)
Human Body Model - all other Pins(7)
Machine Model(8)
ESD1-1
ESD1-2
V
ESD2
Charge Device Model(9)
V
V
±750
±500
ESD3-1
ESD3-2
Corner Pins (Pins 1, 8, 9, 16, 17, 24, 25 and 32)
All other Pins (Pins 2-7, 10-15, 18-23, 26-31)
NC Pin Voltage (NC pins 11, 15, 16, 20, 21, 24, 28 and 30)(10)
VNC
Note 10
Notes
5. Exceeding voltage limits on specified pins may cause a malfunction or permanent damage to the device.
6. Extended voltage range for programming purpose only.
7. Testing is performed in accordance with the Human Body Model (C
= 100pF, R
= 1500Ω),
ZAP
ZAP
8. Testing is performed in accordance with the Machine Model (C
= 200pF, R
= 0Ω),
ZAP
ZAP
9. Testing is performed in accordance with the Charge Device Model, Robotic (C
= 4.0pF).
ZAP
10. Special configuration recommended / mandatory for marked NC pins. Please refer to the typical application shown on page 41.
33911
Analog Integrated Circuit Device Data
Freescale Semiconductor
5