Instruction Sheet
408-9426
2 mm Common Termination (CT)
Head Assembly 58372-1
05 MAY 14 Rev E
Wire Inserter (Shown
In Up Position)
Feed Pawl
Wire
(Portion of Head Assembly
Shown Cut Away for Clarity)
Guide
Drag
Wire Insertion
Carriage
Rod and Adjuster
Adjustable
Stop
Connector
Slot
2 mm CT CONNECTOR
PART NUMBER
173977--[ ]
TYPE
WIRE SIZE
28--26
24
INSULATION DIA RANGE
0.85--1.05 [.033--.041]
0.95--1.05 [.037--.041]
Receptacle Assembly
Horizontal Mount Header
Vertical Mount Header
Receptacle Assembly
173983--[ ]
173985--[ ]
179694--[ ]
Figure 1
1. INTRODUCTION
2. DESCRIPTION
The head assembly, when properly inserted into the
tool, serves as a guide for the connector during
termination.
The 2 mm CT Head Assembly 58372--1 shown in
Figure 1 is designed to terminate the connectors onto
unstripped discrete wire sizes listed in Figure 1.
Features of the head assembly (shown in Figure 1)
and their functions are:
The head is designed for use in Pistol Grip Manual
Handle Assembly 58074--1 (408--6790), Pistol Grip
Pneumatic Handle Assembly 58075--1 (408--6789), or
Pneumatic Power Bench Assembly 58338--1
(408--9393). For head installation procedures, and
setup and operation of the tools, refer to the
instruction sheets (shown in parenthesis) packaged
with the tool.
Wire Inserter—forces unstripped wire into the two
slotted beams of the contact.
Wire Insertion Rod and Adjuster—acts as a piston
for, and regulates travel of, the wire inserter.
Carriage—slides right and left in head assembly
and automatically advances the connector after
each termination.
Dimensions on this sheet are in metric units [with
U.S. customary units in brackets]. Figures and
illustrations are for reference only and are not
drawn to scale.
NOTE
Drag—prevents connector from moving out of
position after it has been advanced.
i
Reasons for reissue of this instruction sheet are
provided in Section 9, REVISION SUMMARY.
Connector Slot—opening into which connector is
secured in head assembly.
.2014 TE Connectivity family of companies
All Rights Reserved
TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
1 of 6
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
*Trademark
visit our website at www.te.com
LOC B
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.