TM
3021/3023 BuckPuck
Wide Range LED Power Module
DATA SHEET Page 3 of 8
Speciꢁcations
Output current, 3021-x-x-350, 3023-x-x-350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350mA1
Output current, 3021-x-x-500, 3023-x-x-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mA1
Output current, 3021-x-x-700, 3023-x-x-700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700mA1
Output current, 3021-x-x-1000, 3023-x-x-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000mA1
Control Pin, adjustment threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.65 V 5%
Control Pin, shutoꢃ threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 V 5%
Control Pin, propagation delay to output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <15 µs
Control Pin, input impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5k ohm
Reference voltage (Vin= 7V or greater) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 VDC 5%2
Optional trim pot adjustment range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40%-110%
External pot adjustment range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0%,1-100%2
Maximum ꢂash frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 kHz
Minimum strobe pulse width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 µs
Output rise time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10 µs3
Output fall time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <350 µs3
Quiescent current (no load or control pin high) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <4.5 mA3
Operating temperature (Tcase). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40-+80°C
Storage temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40-+125°C
Application Information
Description
The 3021/3023 Wide Range LED Power Module is a high eꢁciency dc to dc converter which delivers a ꢀxed output
current by varying the output voltage as required to maintain the speciꢀed current . A fast response current-sensing
circuit permits the unit to be used in applications where ꢂashing or pulsing of the LEDs is required. Several options
are available allowing for use with many types of LEDs and in a variety of operating modes
Fixed Current Drive
The ꢀxed output versions of the 3021/3023 are designed to supply their rated current to one or more LED junctions.
For example, a 350 mA rated unit will drive up to six white 350mA LEDs connected in series at 24VDC. Due to the
nature of the buck regulator, the input voltage must always be higher than the total forward voltage drop of the
LED junction(s) connected in series (2.5V for DC models, 4V for AC models). Thus, for a series string of six junctions
having an average forward drop of 3.5Veach, the required minimum input voltage will be 23.5VDC. A standard
24VDC power supply is a good choice for this application.
Figures 4 through 6 show 700mA and 1000mA rated units driving multiple LEDs. Note that parallel strings of LEDs
can be driven directly with no additional circuitry required to ensure current sharing. The nature of the LEDs
themselves will provide suꢁcient current sharing if the parallel strings comprise of 3 or more junctions each.
1 - Measured with single emitter; output current drops slightly with additional series junctions to limit maximum power dissipation.
2 - When Vin > 7VDC
3 - Actual value varies greatly based on input and/or output voltages. Value shown is for Vin = 24VDC VOUTt=20VDC LED load. Actual values will be smaller in most applications.
©2013 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Speciꢀcations subject to change without notice. May, 2013 - Rev 3.1
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
sales@LUXdrive.com
www.LUXdrive.com
5秒后页面跳转
一文带你解读74HC244资料手册：特性、应用场景、封装方式、引脚配置说明、电气参数、推荐替代型号
AD623资料手册解读：特性、应用、封装、引脚功能及电气参数
RT9193资料手册解读：RT9193引脚功能、电气参数、替换型号推荐
VIPER22A的资料手册解读、引脚参数说明、代换型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
