Power entry modules without line filter
DG11
https://www.schurter.com /PG05
IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole
Screw-on with IP67 and TA35 in white with black
printed symbols
Screw-on with IP67
Snap-in IP40 with TA35 red illuminated and em-
bossed symbols
C14
C18
See below:
Approvals and Compliances
70° C
70° C
Description
Characteristics
- Panel mount :
- Connector and circuit breaker are prewired
- Circuit Breaker non-illuminated or illuminated
- Suitable for use in equipment according to IEC/UL 62368-1
Screw-on version from front or rear side, snap-in version front side
- 2 Functions :
Appliance Inlet , protection class I or II , Circuit breaker type TA35
, 2-pole
- Pre-wired coupling
- V-Lock notch standard
- Quick connect terminal 6.3 x 0.8 mm
Other versions on request
- Version without pre-wiring from inlet to circuit breaker
- Protection class II, 70°C
- Variants in white
References
Substitute for type 6135
Component: circuit breakers TA35 Rocker 2Pole; TA36 Rocker
Alternative: version with line filter DG12
Unique Selling Proposition
- Variant tested for IP67 into the appliance
- Various mounting options
- Recessed rocker prevents accidental manipulation
- Compatible with V-Lock cord retention
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
15A / 250VAC; 60Hz
> 2.5kVAC between L-N
> 3kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
Circuit Breakers
C14 / C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I or II
Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or non-
illuminated.
Conditional short circuit Inc:
2000 A
Allowable Operation Tempe-
rature
IP-Protection
Protection against electric
shock
-25°C to 60°C
front side IP40 / IP67 acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal
Quick connect terminals 6.3 x 0.8 mm
Panel Thickness S
Screw: max 8mm
Recommended torque min 0.25Nm
Snap-in : S =1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Material: Housing
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Connectors