5秒后页面跳转
捷配首页

Datasheet > 290GI-XXT
290GI-XXT PDF预览

290GI-XXT

更新时间： 2024-01-25 03:10:44
品牌 Logo 应用领域
艾迪悌 - IDT 时钟光电二极管外围集成电路晶体
页数 文件大小 规格书
10页 216K
描述
Clock Generator, 200MHz, CMOS, PDSO20, 0.173 INCH, TSSOP-20

阅读下载

获取价格

290GI-XXT 技术参数

是否无铅： 含铅是否Rohs认证： 不符合
生命周期：Active零件包装代码：TSSOP
包装说明：TSSOP,针数：20
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.16
JESD-30 代码：R-PDSO-G20JESD-609代码：e0
长度：6.5 mm端子数量：20
最高工作温度：85 °C最低工作温度：-40 °C
最大输出时钟频率：200 MHz封装主体材料：PLASTIC/EPOXY
封装代码：TSSOP封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度（摄氏度）：225
主时钟/晶体标称频率：166 MHz认证状态：Not Qualified
座面最大高度：1.2 mm最大供电电压：3.465 V
最小供电电压：3.135 V标称供电电压：3.3 V
表面贴装：YES技术：CMOS
温度等级：INDUSTRIAL端子面层：TIN LEAD
端子形式：GULL WING端子节距：0.65 mm
端子位置：DUAL处于峰值回流温度下的最长时间：30
宽度：4.4 mmuPs/uCs/外围集成电路类型：CLOCK GENERATOR, OTHER
Base Number Matches：1

290GI-XXT 数据手册

 浏览型号290GI-XXT的Datasheet PDF文件第1页浏览型号290GI-XXT的Datasheet PDF文件第2页浏览型号290GI-XXT的Datasheet PDF文件第3页浏览型号290GI-XXT的Datasheet PDF文件第5页浏览型号290GI-XXT的Datasheet PDF文件第6页浏览型号290GI-XXT的Datasheet PDF文件第7页 
ICS290  
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER  
EPROM CLOCK SYNTHESIZER  
applications where the clock is driving a component with a  
maximum frequency rating, down spread should be applied.  
In this case, the maximum frequency, including modulation,  
is the target frequency. The effective average frequency is  
less than the target frequency.  
common VCO frequency can be identified.  
Spread Spectrum Modulation Rate  
The spread spectrum modulation frequency applied to the  
output clock frequency may occur at a variety of rates. For  
applications requiring the driving of “down-circuit” PLLs,  
Zero Delay Buffers, or those adhering to PCI standards, the  
spread spectrum modulation rate should be set to 30-33  
kHz. For other applications, a 120 kHz modulation option is  
available.  
The ICS290 operates in both center spread and down  
spread modes. For center spread, the frequency can be  
modulated between ±0.125% to ±2.0%. For down spread,  
the frequency can be modulated between -0.25% to -4.0%.  
Both output frequency banks will utilize identical spread  
spectrum percentage deviations and modulation rates, if a  
Absolute Maximum Ratings  
Stresses above the ratings listed below can cause permanent damage to the ICS290. These ratings, which are  
standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at  
these or any other conditions above those indicated in the operational sections of the specifications is not implied.  
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical  
parameters are guaranteed only over the recommended operating temperature range.  
Parameter  
Condition  
Min.  
Typ.  
Max.  
7
Units  
V
Supply Voltage, VDD  
Inputs  
Referenced to GND  
Referenced to GND  
Referenced to GND  
-0.5  
-0.5  
-65  
VDD+0.5  
VDD+0.5  
150  
V
Clock Outputs  
V
Storage Temperature  
Soldering Temperature  
Junction Temperature  
°C  
°C  
°C  
Max 10 seconds  
260  
125  
Recommended Operation Conditions  
Parameter  
Min.  
0
Typ.  
Max.  
+70  
Units  
° C  
Ambient Operating Temperature (ICS290GP)  
Ambient Operating Temperature (ICS290GIP)  
Power Supply Voltage (measured in respect to GND)  
Power Supply Ramp Time  
-40  
+85  
° C  
+3.135  
+3.3  
+3.465  
4
V
ms  
IDT™ / ICS™ TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER 4  
ICS290  
REV E 041207  
1234567...10

下载PDF

与290GI-XXT相关器件

型号 品牌 描述 获取价格 数据表
290GX HAMMOND TUBE GUITAR AMPLIFIER - OUTPUT TRANSFORMERS

获取价格
290G-XX IDT Clock Generator, 200MHz, CMOS, PDSO20, 0.173 INCH, TSSOP-20

获取价格
290G-XXLF IDT Clock Generator, 200MHz, CMOS, PDSO20, 0.173 INCH, ROHS COMPLIANT, TSSOP-20

获取价格
290G-XXLFT IDT Clock Generator, 200MHz, CMOS, PDSO20, 0.173 INCH, ROHS COMPLIANT, TSSOP-20

获取价格
290G-XXT IDT Clock Generator, 200MHz, CMOS, PDSO20, 0.173 INCH, TSSOP-20

获取价格
290HX HAMMOND TUBE GUITAR AMPLIFIER - OUTPUT TRANSFORMERS

获取价格

与290GI-XXT相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证