AXL F BK S3
Axioline F bus coupler for Sercos
Data sheet
105610_en_02
© PHOENIX CONTACT 2015-11-10
1
Description
Valid from firmware version 1.10.
–
Synchronization
The bus coupler is intended for use within a third-generation
Sercos network and represents the link to the Axioline F
system.
Up to 63 Axioline F devices can be connected to an existing
Sercos network with the help of the bus coupler.
Features of Axioline F
–
Up to 63 additional Axioline F devices can be connect-
ed
–
Typical cycle time of the Axioline F local bus is around
10 μs
Features of Sercos
–
–
–
Runtime in the bus coupler is negligible (goes to 0 µs)
Firmware can be updated
Diagnostic and status indicators
–
–
–
2 Ethernet-Ports
Rotary coding switches for setting the Sercos address
Transmission speed of 100 Mbps with a minimum Ser-
cos cycle time of 31.25 µs
–
–
–
–
Sercos diagnostic LED
Certified according to Sercos V1.12
Supports Sercos V1.31
FSP-IO (Function Specific Profile-IO) for modular I/O
devices
–
–
A maximum of 8 connections are supported (max. 4
consumer and max. 4 producer connections)
Cross communication is possible up to reaching the
maximum number of connections
This data sheet is only valid in association with the UM EN AXL F SYS INST user manual.
You can find further information on Sercos in the UM DE SERCOS SYS user manual.
Make sure you always use the latest documentation.
It can be downloaded from the product at phoenixcontact.net/products.
You will always find the current SDDML-files here.