Limit and Enclosed Switches
CX Series
Weather-Sealed Explosion-Proof Switches
80CX SWITCHES ALSO WITHSTAND
CORROSIVE ENVIRONMENTS
STAINLESS STEEL LEVER ACTUATORS
80CX switches have rugged bronze hous- These levers match the corrosion resistance of the 80CX housing. Non-sparking rollers
ings which are resistant to salt water and must be used in hazardous locations.
other corrosive environments. They comply
ORDER GUIDE STAINLESS STEEL LEVERS WITH NYLON ROLLERS
with the NEMA 4X requirement for protec-
tion against corrosion, in addition to NEMA
Std. Roller Lever
enclosure standards met by other CX
Radius (In.)
Dia. In.
Width In.
Catalog Listing
switches. O-ring seals make the enclosure
weather-proof, but are outside of required
flame paths so explosion-proof require-
ments are maintained.
1.5
1.5
.75
.75
.25
.25
LS2Z51A
LS2Z51
Std. Lever w/o roller
Adjustable Radius
1.5-3.5
.75
.25
LS2Z52A
Note: Refer to page A36 for lever dimensions.
ROTARY ACTUATED SWITCHES
ORDER GUIDE
As factory assembled, all basic switches
operate on clockwise or counterclockwise
rotation. Actuating mechanism can be field
adjusted for CW or CCW operation only. No
tools are required.
Catalog Listings
Shaft Restoring
Force To Center
Electrical
Housing
Size
Basic
Ratings
1
2
Description
15 amp. SPDT
With
Without
Switch(es) Page A109
81CX1
81CX2
81CX4
81CX11
81CX12
81CX14
Standard
Standard
Standard
BZ(1)
BZ(2)
BZ(4)
A
A
80CX switches available with standard
housing only.
A
20 amp. SPDT
82CX2
82CX4
82CX12
82CX14
Standard
Standard
BA(2)
BA(4)
B
B
Actuators are not included with switches.
Order them separately.
Also UL listed for Class I,
Group B (hydrogen
atmospheres). 10 amp. DPDT
84CX2
84CX12
Standard
DT(2)
C
MOUNTING HOLES
Add the letter A to listings with side
mounting holes tapped 5/16-18(8).
Notes: Refer to page A127.
Example: 82CX2A
Add the letter B to listings with thru
mounting holes tapped 3/8-24(4).
MODIFIED SHAFT ENABLES
DIRECT COUPLING
CX switches are available with a 3⁄8 inch for adapting CX switches to existing 2-hole
diameter by 3⁄4 inch long flatted shaft which mounting arrangements.
conforms to standard NEMA motor shaft
MOUNTING BRACKET
An aluminum mounting bracket is available
Example: 81CX2B.
To order, specify Catalog Listing 15PA148-
CX.
specifications. It accepts commercially
available shaft couplers, permitting easy,
direct coupling to most equipment actua-
tors.
15PA148-CX
To specify a ‘‘direct-couple’’ CX switch, add
-DO1 to catalog listings shown in the order
guides, i.e.11CX12-DO1. Pricingisthesame
as for unmodified versions.
Flatted
Shaft
Version
Honeywell ɀ Sensing and Control ɀ1-800-537-6945 USA ɀ ⍣1-815-235-6847 International ɀ1-800-737-3360 Canada
A129