240-075
Rear Panel Mount Micro-D Filter Connectors
Solder Cup
Glenair Filtered Solder Cup Rear Panel Mount Micro-D's provide EMI
solutions in a miniaturized M83513 type connector. These connectors
feature ceramic capacitor planar arrays and ferrite inductors. Solder cups
accept #26 thru #30 AWG wire, or specify oversize contacts for #24 gage
wire.
Choose Pi or C Filter Arrays in eight filter classes and six layouts.
Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513
requirements and are 100% intermateable with standard connectors.
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on
the connector housing or choose optional finishes such as gold or chem film.
How To Order Rear Panel Mount Micro-D Filter connectors with Solder Cups
240ꢀ075 ꢀ2 ꢀ25
D
Sample Part Number
Series
S
C
F
ꢀR1 ꢀN
N
240-075
Aluminum Shell
1 - Cadmium
5 - Gold
Shell Finish
2 - Nickel
6 - Chem Film
33 - Nickel/PTFE
Contact Layout
Contact Type
Filter Type
9, 15, 21, 25, 31, 37 (See Table II)
P - Pin S - Socket
C - C Filter P - Pi Filter
Filter Class
A, B, C, D, E, F, G, J (See Table I)
Rear Panel Mount Hardware Option
Hardware Option
See Note 1
R1 - 0.032" (0.8) Panel
R4 - 0.093" (2.4) Panel
R2 - 0.047" (1.2) Panel
R5 - 0.125" (3.2) Panel
R3 - 0.062" (1.6) Panel
R6 - 0.080" (2.0) Panel
Plug EMI Ground Spring
See Note 2
G - Ground spring installed N - No ground spring (N applies to all receptacle assemblies)
C - Conductive N - Non-Conductive (Nitrile)
O-Ring
Table I: Micro-D Filter Classes and Performance
Filter Class
A
B
C
D
E
F
G
J
Capacitance (pF)
4000-6000
C Filter
Pi Filter
19000-28000 16000-22500
9000-16500
1650-2500
3300-5000
400-650
200-300
400-600
35–60
38000-56000 32000-45000 18000-33000
8000-12000
800-1300
70–120
Dimensions in inches (millimeters) and are subject to change without notice.
Rev. Jun. 2 2014
Printed in U.S.A.
© 2013 Glenair, Inc.
U.S. CAGE Code 06324
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
D-22