Series 219 SMT DIP
®
Surface Mount
DIP Switch —
Auto Placeable
Features
Optimized Mechanical Features
• Removable tape seal to withstand IR vapor phase
or wave soldering temperatures,and board washing
• Positive detent separate from contactor
• Available low profile, medium, and extended height
actuators
• Gull-wing and "J" lead terminal configurations
• Tube or tape and reel packaging available
Optimized Contact System
• Redundant, wiping contact
• Contactor does not deflect during actuation
Premium Materials
• Gold plated beryllium copper contacts
• All plastic rated UL 94 V-0
• High temperature body and actuator materials
• RoHS compliant
Electrical and Mechanical Specifications
Switch Function
Coplanarity
SPST- 2 through 10 and 12 positions
0.10mm (.004") maximum
Switch Contact Resistance
Allowable Solder Time
25 milliohms maximum initial
Up to 60 seconds at 260°C
50 milliohms maximum at the end of life
Vibration
Insulation Resistance
Per MIL-STD-202F, method 204D, condition B
(.06" or 15 G’s between 10 HZ to 2K HZ) with no
contact inconsistencies greater than 1
microsecond.
1,000 megohms minimum between
insulated terminals
Dielectric Strength
500 VDC for 1 minute between
Shock
adjacent switches
Nonswitching Rating
100 mA or 50 VDC maximum
Per MIL-STD-202F, method 213B, condition A
(50 G’s) with no contact inconsistencies greater
than 1 microsecond.
Switch Capacitance
Sealing
5 pF maximum between adjacent closed switches
Standard bottom seal
Optional top tape seal
Operating Temperature
Marking
- 55°C to +85°C
Special marking available consult CTS.
Actuation Life
Packaging
2,000 cycles switching 100 mA @ 20 VDC or
0.1 mA @ 5 VDC (dry circuit)
Standard : Anti-static tube packaging
Optional : Tape and reel packaging
© 2008 CTS Corporation. All rights reserved. Information subject to change.
2/12/08
1 - 2
CTS Electronic Components
www.ctscorp.com