211D
Vishay
www.vishay.com
Type 211D Wet Tantalum Capacitor Array with Tantalum Cased
Tantalum Internal Components for - 55 °C to + 125 °C Operation
FEATURES
Vishay 211D series was designed as an upgrade to the older
and mature 200D and 202D Tantalpak® Capacitor
assemblies. The 211D is constructed using tantalum
capacitors, similar to the Vishay 135D series or the
MIL-PRF-39006/22 or /25 styles. This enables the 211D to
exhibit the improved performance characteristics of the
tantalum-cased capacitors. Capable of withstanding 3.0 V
reverse. The 211D has applicability in new designs when
used for energy storage, filtering and similar functions.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Tolerance: At 120 Hz, + 25 °C, 20 %
Standard: 10 % available
Life Test: Capacitors shall withstand 2000 h at a
temperature of + 85 °C or + 125 °C at the rated DC working
voltage. Following the life test:
1. DCL shall not exceed the original requirement
2. ESR shall not exceed the original requirement
3. Capacitance shall not change more than 10 %
DC Leakage Current (DCL maximum):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table.
ORDERING INFORMATION
211D
228
X
030
A5
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE
This is expressed in
picofarads. The first two
digits are significant
figures. The third is the
number of zeros.
X0 = 20 %
X9 = 10 %
This is expressed in volts.
To complete the three digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V).
See dimensional
configurations
DIMENSIONS
H
SERIES “A” CASE
1.305 0.031
SERIES “B” CASE
1.593 0.062
CASE CODE
CASE HEIGHT
A1
A2
A3
A4
A5
B1
B2
B3
B4
B5
B6
B7
1.062 [26.97]
1.375 [34.93]
1.625 [41.28]
2.000 [50.60]
2.500 [63.50]
1.500 [38.10]
1.875 [47.63]
2.250 [57.15]
2.625 [66.68]
3.000 [76.20]
3.375 [85.73]
3.750 [95.25]
0.720 0.031
1.000 0.062
0.625 0.015
0.750 0.015
0.281 0.031
0.281 0.031
H ± 0.031
H ± 0.062
1.275 0.015
Revision: 10-Nov-11
Document Number: 40111
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000