1N5985UR thru 1N6031BUR
( or MLL5985 thru MLL6031B)
Surface Mount 500 mW Zener Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The popular 1N5985UR thru 1N6031BUR (or MLL5985 thru MLL6031B) series of
0.5 watt Zener Voltage Regulators provides selection from 2.4 to 200 volts in
standard 5% or 10% tolerances as well as tighter tolerances identified by different
suffix letters on the part number. These glass surface mount DO-213AA Zeners
are also available with an internal metallurgical bond option by adding a “-1” suffix
(see separate data sheet) including various equivalent military screening levels as
described in the Features section. Microsemi also offers numerous other Zener
DO-213AA
products to meet higher and lower power applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
Surface mount equivalent to JEDEC registered 1N5985
•
Regulates voltage over a broad operating current
to 1N6031
and temperature range
Similar to operating current conditions of the BZV55
Pro Electron series of Zener products in Europe
Internal metallurgical bonds are optionally available
with “-1” suffix (see separate data sheet) with screening
options in accordance with MIL-PRF-19500 for JAN,
JANTX, JANTXV, and JANS by adding MQ, MX, MV,
or MSP prefixes respectively to part numbers
Axial-leaded equivalents available as 1N5985 to
1N6031 in the DO-35 package including “-1” suffix
options (see separate data sheet)
•
•
Extensive selection from 2.4 to 200 V
Standard voltage tolerances are plus/minus 5% with
B suffix, 10 % with A suffix identification
•
Tight tolerances available in plus or minus 2% or
1% with C or D suffix respectively
Nonsensitive to ESD (MIL-STD-750 Method 1020)
Minimal capacitance (see Figure 2)
•
•
•
•
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
Operating and Storage temperature: -65ºC to +175ºC
•
•
•
CASE: Hermetically sealed glass DO-213AA
Thermal Resistance: 150 ºC/W junction to end cap or
300ºC/W for junction to ambient when mounted on FR4
PC board (1 oz Cu) with recommended footprint (see
last page)
(SOD80 or MLL34) MELF style package
TERMINALS: End caps tin-lead plated solderable
per MIL-STD-750, method 2026
POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation
•
Steady-State Power: 0.5 watts at end cap
temperatures TEC < 100oC or 0.5 watts at ambient TA <
25ºC when mounted on FR4 PC board as described for
thermal resistance (also see Figure 1)
•
•
MARKING: cathode band only
•
•
Forward voltage @200 mA: 1.1 volts
TAPE & REEL option: Standard per EIA-481-B
with 12 mm tape, 2000 per 7 inch reel or 5000 per
13 inch reel (add “TR” suffix to part number)
WEIGHT: 0.04 grams
Solder Temperatures: 260 ºC for 10 s (max)
•
•
See package dimensions on last page
Copyright 2003
Microsemi
Page 1
11-03-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5秒后页面跳转
STM32F030C6芯片介绍：主要参数分析、引脚配置说明、功耗及封装
PCF8591数据手册解读：参数、引脚说明
一文带你了解ss8050参数、引脚配置、应用指南
深入解析AD7606高性能多通道模数转换器：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
