19C Series
Temperature compensated stainless steel Pressure Sensor cells
SPECIFICATION NOTES:
1: Reference conditions (unless otherwise noted): Supply Voltage, VS = 10 Vdc; tamb = 25°C
2: Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage
3: Linearity is based onBest fitStraightLine. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure.
4.
Maximum error band of the offset voltage or span over the compensated temperature range of 0-70°C, relative to the 25°C reading.
5: Long term stability over a one year period.
6: Response time for 0 psi to full scale span pressure step change
7: If maximum pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture.
8:
Non-concentricity effects at the diaphragm weld area may cause run out of up ±0.006" (0.15) between the upper and lower portion of the sensor body.(It is recommended that a counter
bore be used to allow for the effects of this non-concentricity.)
ORDERING INFORMATION - PART # DESCRIPTION
19 C XXX A,G
1,2...8
1
2
3
4
5
6
7
8
=
=
=
=
=
=
=
=
Cell w/ Body O-Ring
Flush Mount
Flush Mount w/ Flange
1/8 27 NPT
1/4 18 NPT
7/16 UNF
19m
cell
Compensated
Sensor
1/4 BSP
Euro O-Ring
Pressure Range
in PSI
005 =
5 psi (gage only)
015 = 15 psi
030 = 30 psi
050 = 50 psi
Pressure Type
100 = 100 psi
200 = 200 psi
500 = 500 psi
A
= Absolute
G = Gage
1000 = 1000 psi (absolute only)
For example: Part #19C100A4 = 19 mm Cell, Compensated, 100 psi, Absolute, 1/8NPT Port
SenSym and Sensortechnics reserve the right to make changes to any products herein. SenSym and Sensortechnics do not assume any liability arising out of the application or use of any product
or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
April 1998/025
Aubinger Weg 27, 82178 Puchheim, Germany
Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33
http://www.sensortechnics.com