MODEL: 15BX
Dual Channel Input/Output Isolators 15-RACK
GENERAL SPECIFICATIONS
Construction: Metal plates assembly
Coating: Zn-Cr (black), alumetized steel
Connection
STANDARD RACK
Functions & Features
Power input: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated brass
Isolation: I/O connector to power to FG
• Standard 19" rack for 15-RACK signal conditioners
• Line power access at the terminal card, supplied via the
rear rack bus
• Direct output interface with the rack side connector
INSTALLATION
Power input
•DC: 24 V DC ±10 %, (ripple 10 % p-p max.)
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: JIS or EIA standard rack or surface
Weight: 1.9 kg (4.2 lb)
PERFORMANCE
MODEL: 15BX–[1][2]
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(I/O connector to power to FG)
ORDERING INFORMATION
• Code number: 15BX-[1][2]
Specify a code from below for each [1] and [2].
(e.g. 15BX-4/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] CONNECTOR
4: Fujitsu FCN type I/O connector
9: Omron DCS connector
M-System guarantees the connecting section.
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Power supply and signal conditioner side of the main PWB are not coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• Blank filler plate (model: P-101)
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)
15BX SPECIFICATIONS
ES-0691 Rev.9 Page 1/4
http://www.m-system.co.jp/