150D
Vishay Sprague
www.vishay.com
Solid-Electrolyte TANTALEX™ Capacitors,
Hermetically-Sealed, Axial-Lead
FEATURES
• Terminations: tin / lead (SnPb),
100 ꢀ tin (RoHS-compliant)
Available
Available
• These high performance, hermetically-sealed
TANTALEX capacitors have set the standard for
solid-electrolyte tantalum capacitors for more
than three decades
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability
• Performance and reliability have been proven in
commercial, industrial and military applications
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
• Available in four case codes and capacitors and are
supplied with plastic-film insulation
Capacitance Tolerance: at 120 Hz, +25 °C
20 ꢀ, 10 ꢀ standard. 5 ꢀ available as special
• Terminals are solid, tinned nickel wire leads
Dissipation Factor: at 120 Hz, +25 °C
• The military equivalent of the 150D is the M39003/01 (style
CSR13) which is qualified to MIL-PRF-39003/1
DC Leakage Current (DCL Max.):
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings table
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
at +85 °C: leakage current shall not exceed 10 times the
values listed in the Standard Ratings table
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
at +125 °C: leakage shall not exceed 15 times the values
listed in the Standard Ratings table
Life Test: capacitors shall withstand rated DC voltage
applied at +85 °C for 2000 h or derated DC voltage applied
at +125 °C for 1000 h
Following the life test:
1. DCL shall not exceed 125 ꢀ of the initial requirement
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed 5 ꢀ
ORDERING INFORMATION
150D
224
X0
006
A
2
T
E3
MODEL
CAPACITANCE
CAPACITANCE DC VOLTAGE RATING
CASE
CODE
STYLE
NUMBER
PACKAGING
RoHS-
COMPLIANT
TOLERANCE
AT 85 °C
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = 20 ꢀ
X9 = 10 ꢀ
X5 = 5 ꢀ *
* Special order
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
0 = no sleeve
2 = insulated
sleeve
B = bulk
T = tape
and reel
G = ammo
pack
E3 = 100 ꢀ tin
termination
(RoHS-compliant)
Blank = SnPb
termination
Revision: 16-Nov-17
Document Number: 40015
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000