Model 1210
þ Process Control
þ Medical Instrumentation
þ HVAC
PC Board Mountable Pressure Sensor
0-100 mV Output
þ Barometric Pressure
þ Air Flow Management
þ Avionics
Gage, Differential and Absolute
Temperature Compensated
DESCRIPTION
The Model 1210 is a temperature compensated, piezoresistive
silicon pressure sensor packaged in a dual-in-line configuration.
It is intended for cost sensitive applications where excellent
performance and long-term stability are required.
Integral temperature compensation is provided over a range
of 0-50°C using laser-trimmed resistors. An additional laser-
trimmed resistor is included to normalize pressure sensitivity
variations by programming the gain of an external differential
amplifier. This provides sensitivity interchangeability of ± ±1.
Gage, absolute, and differential pressure ranges from 0-2
PSI to 0-±00 PSI are available. Multiple lead and tube
configurations are also available for customizing the package for
specific applications.
Please refer to the low pressure section for information on
products with operating pressures less than 0-2 PSI. For a
compensated sensor using a current set resistor as opposed to a
gain set resistor, please refer to the Model ±220.
FEATURES
þ Dual-in-line Package
þ
þ
þ
± ±0.1% Nn-linearity
± ±0ꢀ1%ꢁemperature%PerfNrmance
DIMENSIONS
.0±1%Interchangeable%Span%
(prNvided%by%gain%set%resistNr)
þ
þ
SNlid%State%Reliability
LNw%PNwer
STANDARD RANGES
Range
psia
psid
●
psig
●
0 to 2
0 to 5
●
●
●
●
●
●
●
0 to 15
0 to 30
0 to 50
0 to 100
●
●
●
●
●
●
●
●
1-14
HITs – Standard