Datasheet > 1120_V12

1120_V12

更新时间： 2024-01-14 15:23:17

品牌	Logo	应用领域
急速微 - ALLEGRO		开关
页数	文件大小	规格书
14页	326K
描述
Chopper Stabilized Precision Hall Effect Switches

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

1120_V12 数据手册

A1120, A1121, A1122

and A1125

Chopper Stabilized Precision Hall Effect Switches

The chopper stabilization technique uses a 400 kHz high fre-

quency clock. For demodulation process, a sample and hold

technique is used, where the sampling is performed at twice the

chopper frequency (800 kHz). This high-frequency operation

allows a greater sampling rate, which results in higher accuracy

and faster signal-processing capability. This approach desensi-

tizes the chip to the effects of thermal and mechanical stresses,

and produces devices that have extremely stable quiescent Hall

output voltages and precise recoverability after temperature

cycling. This technique is made possible through the use of a

BiCMOS process, which allows the use of low-offset, low-noise

amplifiers in combination with high-density logic integration and

sample-and-hold circuits.

Chopper Stabilization Technique

When using Hall effect technology, a limiting factor for

switchpoint accuracy is the small signal voltage developed across

the Hall element. This voltage is disproportionally small relative

to the offset that can be produced at the output of the Hall ele-

ment. This makes it difficult to process the signal while main-

taining an accurate, reliable output over the specified operating

temperature and voltage ranges.

Chopper stabilization is a unique approach used to minimize

Hall offset on the chip. The patented Allegro technique, namely

Dynamic Quadrature Offset Cancellation, removes key sources

of the output drift induced by thermal and mechanical stresses.

This offset reduction technique is based on a signal modulation-

demodulation process. The undesired offset signal is separated

from the magnetic field-induced signal in the frequency domain,

through modulation. The subsequent demodulation acts as a

modulation process for the offset, causing the magnetic field

induced signal to recover its original spectrum at baseband, while

the dc offset becomes a high-frequency signal. The magnetic

sourced signal then can pass through a low-pass filter, while the

modulated DC offset is suppressed. This configuration is illus-

trated in figure 2.

The repeatability of magnetic field-induced switching is affected

slightly by a chopper technique. However, the Allegro high

frequency chopping approach minimizes the affect of jitter and

makes it imperceptible in most applications. Applications that are

more likely to be sensitive to such degradation are those requiring

precise sensing of alternating magnetic fields; for example, speed

sensing of ring-magnet targets. For such applications, Allegro

recommends its digital device families with lower sensitivity

to jitter. For more information on those devices, contact your

Allegro sales representative.

Regulator

Clock/Logic

Low-Pass

Filter

Hall Element

Amp

Figure 2. Model of chopper stabilization technique

Allegro MicroSystems, Inc.

115 Northeast Cutoff

Worcester, Massachusetts 01615-0036 U.S.A.

1.508.853.5000; www.allegromicro.com

1...8 9 101112 13 14

中文翻译

下载PDF

与1120_V12相关器件

型号	品牌	获取价格	描述	数据表
1120000001	MOLEX	获取价格	applicom PCU2000ETH Combo Ethernet 10/100 Mbps + Profibus 1.5 MB card, PCI 3.3/ 5V bus, Ro
1120000003	MOLEX	获取价格	applicom® PCU2000ETH Combo Ethernet 10/100 Mb
1120000005	MOLEX	获取价格	applicom PCU2000ETH Ethernet TCP/IP 10/100 Mbps card, PCI 3.3/ 5V bus, RoHS compliant
112-000306-10	OSCILENT	获取价格	32.768 KHz Tuning Fork
112-000306-20	OSCILENT	获取价格	32.768 KHz Tuning Fork
112-000312-10	OSCILENT	获取价格	32.768 KHz Tuning Fork
112-000312-10-TR	OSCILENT	获取价格	Parallel - Fundamental Quartz Crystal, 0.032768MHz Nom, ROHS COMPLIANT PACKAGE-2
112-000312-20	OSCILENT	获取价格	32.768 KHz Tuning Fork
1120005026	MOLEX	获取价格	applicom PCIE2000ETH Ethernet TCP/IP 10/100 Mbps card, PCI Express 1x bus, RoHS compliant
1120005027	MOLEX	获取价格	applicom PCIE2000ETH Combo Ethernet 10/100 Mbps + Serial RS485/422 card, PCI Express 1x bu

与1120_V12相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

11
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

14
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

8
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

12

产品中心

服务支持

精选活动

关于我们

帮助中心

1120_V12

1120_V12 数据手册

与1120_V12相关器件

与1120_V12相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1120_V12

1120_V12 数据手册

与1120_V12相关器件

与1120_V12相关文章

您还可以找

您在本页遇到什么问题？