PLC ACCESSORIES
Power Terminal Block
Description
Type
Order No.
Pcs./Pck.
Power terminal block, to supply up to four potentials,
same shape as the PLC INTERFACE series
Gray PLC ESK GY
2966508
5
Plug-In Bridges
Description
Continuous plug-in bridge, 500 mm long, insulated,
can be cut to any length, for potential distribution with
Type
Order No.
2966786
2966692
2966838
2966236
2966812
2966825
2967688
Pcs./Pck.
Red FBST 500-PLC RD
Blue FBST 500-PLC BU
Gray FBST 500-PLC GY
Red FBST 6-PLC RD
Blue FBST 6-PLC BU
Gray FBST 6-PLC GY
Gray FBST 8-PLC GY
20
20
20
50
50
50
50
PLC..., I
= 32 A
max
Plug-in bridge, 2-pos., 6 mm long, insulated, for potential
distribution with PLC..., I = 6 A
max
Plug-in bridge, 2-pos., 8 mm long, insulated, for potential
distribution with insulating plate
Plug-in bridge, 2-pos., 14 mm long, insulated, for potential
distribution
Black FBST 14-PLC BK
2967691
50
Insulating Plate
Description
Type
Order No.
Pcs./Pck.
Insulating plate, 2 mm thick, to be installed at the start and end of every PLC PLC ATP BK
terminal strip. For the visual separation of groups, safe isolation of different
voltages from adjacent PLC INTERFACE modules according to
DIN EN 50178/VDE 0160, isolation of adjacent bridges with different
potentials, isolation of PLC INTERFACE modules for voltages greater than
250 V. Color: black
2966841
25
Feed-Through Bridge
Description
Type
Order No.
Pcs./Pck.
Passive feed-through bridge, can be inserted instead of a
relay or solid-state relay, bridges terminal points A1 and 14
Black PLC BP (A1-A14)
2980283
1
Screwdriver
Description
Type
Order No.
Pcs./Pck.
Bladed type screwdriver, blade: 0.6 x 3.5 x 100 mm, length 180 mm
SZF 1-0,6X3,5
1204517
10
Technical Data
PLC-ESK Power Terminal Block
1
Nominal input voltage
250 V AC, maximum
32 A, maximum
Total current
Connection type
Screw connection
2
2
Conductor cross section (solid and stranded)
0.2 mm ... 4 mm
Stripping length
Dimensions (W x H x D)
Housing material
1
10 mm
9 mm x 94 mm x 80 mm
Polyamide PA, color: gray
The PLC-ATP BK insulating plate must be installed for voltages greater than 250 V (L1, L2, L3) between the same terminal points on adjacent modules
(see "Insulating Plate"). FBST 8-PLC... or FBST 500... is then used for potential bridging.
© PHOENIX CONTACT 02/2007
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
103153_00_en
3
Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00
www.phoenixcontact.com