ZXLD1370Q
AUTOMOTIVE COMPLIANT 60V HIGH ACCURACY BUCK/
BOOST/BUCK-BOOST LED DRIVER-CONTROLLER
Description
Pin Assignments
The ZXLD1370Q is an LED driver controller IC for driving external
MOSFETs to drive high-current LEDs. It is a multi-topology controller
that efficiently controls the current through series connected LEDs.
The multi-topology enables it to operate in buck, boost and buck-
boost configurations.
(Top View)
The 60V capability coupled with its multi-topology capability enables it
to be used in a wide range of applications and drive in excess of
15 LEDs in series.
The ZXLD1370Q is a modified hysteretic controller using a patent
pending control scheme providing high output current accuracy in all
three modes of operation. High accuracy dimming is achieved
through DC control and high frequency PWM control.
TSSOP-16EP
The ZXLD1370Q uses two pins for fault diagnosis. A flag output
highlights a fault, while the multilevel status pin gives further
information on the exact fault.
Features
0.5% Typical Output Current Accuracy
6V to 60V Operating Voltage Range
LED Driver Supports Buck, Boost and Buck-Boost Configurations
Wide Dynamic Range Dimming
20:1 DC Dimming
1000:1 Dimming Range at 500Hz
The ZXLD1370Q is qualified to AEC-Q100 Grade 1 and is automotive
compliant supporting PPAP documents.
Up to 1MHz Switching
High Temperature Control of LED Current Using TADJ
Available in Thermally Enhanced TSSOP-16EP Package with
Green Molding Compound
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Automotive Compliant
Qualified to AEC-Q100 Grade 1 and TS16949 Certification
PPAP Capable (Note 4)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Refer to https://www.diodes.com/quality/.
Typical Applications Circuit
VIN 8V
to 18V
I LED = 1A
R1
0R1
LED 1
to 4
L1
33mH
VAUX
VIN
ISM
C1
PWM
GI
4.7µF
SD1
PSD3100
COUT
ADJ
REF
TADJ
GATE
4.7µF
Q1
DMN6068LK3
RGI2
62k
FLAG
R4
2k
STATUS
SGND PGND
RGI1
51k
SHP
U1
ZXLD1370Q
C2
100pF
TH1
10k
GND
Thermally connected
Buck-Boost Diagram Utilizing Thermistor and TADJ
1 of 39
www.diodes.com
February 2018
© Diodes Incorporated
ZXLD1370Q
Document number: DS37117 Rev. 4 - 2