ZXLD1601
ADJ USTABLE DC - DC BOOST CONVERTER WITH INTERNAL SWITCH
IN SC70
DESCRIPTION
The ZXLD1601 is a PFM inductive boost converter Output voltage is set to a nom inal value between 26V
designed to provide output voltages of up to 28V from and 28V, by an internal resistor network, but can be
a 2.5V to 5.5V input supply.
adjusted to lower values by external resistors, an
external PWM control signal applied to the ‘Enable’
pin, or a com bination of the two. Depending upon the
control frequency, the PWM signal will provide either
continuous (low ripple) or gated control. The PWM
filter com ponents are contained within the chip.
The ZXLD1601 includes the output switch and peak
current sense resistor, and can provide up to 10m A
output current at m axim um output voltage. Higher
current is available at lower output voltages.
Quiescent current is typically 60A and a shutdown Minim um output voltage is determ ined by the input
function is provided to reduce this current to less than supply.
100nA in the ‘off’ state.
The device is assem bled in a low profile SC70-6 pin
package.
ADVANCED FEATURES
APPLICATIONS
• LCD and OLED bias
• Internal 30V NDMOS switch, current sense and
output setting resistors.
• True analogue output voltage control via PWM
• Cellular / m obile phones
• Digital cam eras
with internal filter
FEATURES
• Low profile SC70-6 pin package
• PDAs
• LCD m odules
• Internal PWM filter for adjustable output
• High efficiency (85% typ)
• Varactor and PIN diode bias
• Palm top com puters
• Wide input voltage range: 2.5V to 5.5V
• Up to 250m A output current at 5V
• Low quiescent current: (60A typ)
• 100nA m axim um shutdown current
• Up to 1MHz switching frequency
• Low external com ponent count
TYPICAL APPLICATION CIRCUIT
PINOUT
TOP VIEW
ISSUE 3 - AUGUST 2004
S E M IC O N D U C T O R S
1