S Series
Vishay Foil Resistors
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
01
10
VISHAY
XXXX
S102C
XXXXXX
100R01
0.01 %
Value Code
Year Week
H
Tolerance
ST1)
SW
LL
Model Number
LS
Lead Material #22 AWG
Round Solder Coated Copper
Note
1. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the unit
after all soldering processes.
TABLE 2 - MODEL SELECTION
AMBIENT
TIGHTEST
TOLERANCE
VS2 LOWEST
RESISTANCE
VALUE
DIMENSIONS
pp
POWER RATING
RESISTANCE MAXIMUM
AVERAGE
WEIGHT
IN GRAMS
MODEL
NUMBER
RANGE
WORKING
VOLTAGE
at
at
F (1)
(INCHES)
(Ω)
INCHES
+ 7. /C + 1ꢀ0 /C
0.6 W
0.3 W
0.2 W
W: 0.105 0.010
L: 0.300 0.010
H: 0.326 0.010
ST: 0.010 min.
SW: 0.035 0.010 1.02 0.13
LL: 1.000 0.125 25.4 3.18
LS: 0.150 0.0054 3.81 0.13
2.67 0.25
7.62 0.25
8.28 0.25
0.254 min.
S102C
1 to 150K
1 to 100K
1 to 500K
1 to 300K
1 to 750K
1 to 500K
0.5 to 1M
0.5 to 600K
(S102J) (2)
up to 100K
0.4 W
300
350
350
500
0.6
1.4
1.9
4.0
S102K
(S102L) (2)
over 100K
1.0 W
0.5 W
0.3 W
W: 0.160 max.
L: 0.575 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
LL: 1.000 0.125
LS: 0.400 0.020 10.16 0.51
4.06 max.
14.61 max.
10.49 max.
S104D
(S104F) (1)
up to 200K
(0.138)
(0.565)
(0.413)
0.6 W
0.005 %/50 Ω
0.01 %/25 Ω
0.02 %/12 Ω
0.05 %/5 Ω
0.1 %/2 Ω
S104K
over 200K
25.4 3.18
1.5 W 0.75 W
up to 300K
W: 0.160 max.
L: 0.820 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
LL: 1.000 0.125
LS: 0.650 0.020 16.51 0.51 (0.7 0.05)
4.06 max.
20.83 max.
10.49 max.
(0.138)
(0.890)
(0.413)
S105D
(S105F) (1)
0.50 %/1 Ω
0.8 W
0.4 W
S105K
S106D
S106K
over 300K
25.4 3.18
2.0 W
1.0 W
1.0 W
W: 0.260 max.
L: 1.200 max.
H: 0.413 max.
ST: 0.035 0.005 0.889 0.13
SW: 0.050 0.005 1.27 0.13
6.60 max.
30.48 max.
10.49 max.
up to 400K
0.5 W
over 400K
LL: 1.000 0.125
25.4 3.18
LS: 0.900 0.020 22.86 0.51
Notes
(1)
(2)
S104F and S105F have different package dimensions (see last column). All other specifications are the same.
0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63001
Revision: 25-Jun-09