XDPE132G5H
XDPE132G5H Digital Multi-phase Controller
16-phase Dual Loop PWM Voltage Regulator
Quality Requirement Category: Industrial
Features
16-phase single or up to 8+8 dual loop configurable PWM Controller
I2C and PMBus Rev 1.3 with AVSBus for output voltage control and telemetry
0.625 mV VID step via PMBUS VOUT_COMMAND
AMD SVI2 Rev 1.10 compliant with Peak Current Control (PCC) and IOUT telemetry support up to 1023 A
nVIDIA PWMVID compliant
Phase Fault Protection and Flag with auto-compensation
Digitally Progammable Load Line – No external components
Min/Max Telemetry registers and real-time monitoring via PMBus and AVSBus (IOUT, VOUT, Temp)
Phase current sense gain and offset calibration
Cycle-by-cycle phase current limit
Analog “IMON” for output current reporting
Two IOUT_WARN pins to flag an output OC condition on both loops
Input Over Power flag
Catastophic Fault Output (CAT_FLT) pin
Dual Enable Pins
Adaptive Transient Algorithm (ATA) minimizes output bulk capacitors and system cost
Efficiency Shaping Features using Dynamic Phase Control and Diode Emulation
Protections: OVP, UVP, OC Warn, OCP, OT Warn, OTP, cycle-by-cycle per phase current limit
Multiple Time Programming (MTP) with up to 25 writes for USER Section
Compatible with 3.3 V tri-state Drivers
200 kHz to 2 MHz switching frequency per phase
+3.3 V supply voltage; -40 °C to 120 °C Ambient
Pb-Free, Halogen Free, RoHS, 7x7 mm, 56-pin, 0.4 mm pitch QFN
Applications
AMD SVI2 GPU and CPU Processors
nVIDIA GPU Processors
High Performance ASIC Processors with AVSBus.
High performance Ethernet Switching and Routing ASSPs
Description
The XDPE132G5H is a digital multi-phase buck controller that can be configured in either a single loop or dual
loop mode with a feature set optimized to support high performance processors that require AVSBus, AMD SVI2,
or nVIDIA PWMVID. It can support up to 16 phases and allows flexible phase assignment between the two loops.
The controller allows system voltage set point programming and margining through PMBus or dynamic voltage
Datasheet
Please read the Important Notice and Warnings at the end of this document
Rev 1.0
www.infineon.com
2021-07-15