XC9235/XC9236/XC9237Series
ETR0514-008
600mA Driver Tr. Built-In, Synchronous Step-Down DC/DC Converters
☆GreenOperation Compatible
■GENERAL DESCRIPTION
The XC9235/XC9236/XC9237 series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42Ω
P-channel driver transistor and 0.52ΩN-channel switching transistor, designed to allow the use of ceramic capacitors. Operating
voltage range is from 2.0V to 6.0V (A～C types), 1.8V to 6.0V (D～G types). For the D/F types which have a reference voltage
as 0.8V (accuracy: ±2.0%), the output voltage can be set from 0.9V by using two eternal resistors. The A/B/C/E/G types having
a fixed output voltage from 0.8V to 4.0V in increments of 0.05V (accuracy: ±2.0%). The device provides a high efficiency, stable
power supply with an output current of 600mA to be configured using only a coil and two capacitors connected externally.
With the built-in oscillator, ether 1.2MHz or 3.0MHz can be selected for suiting to your particular application. As for operation
mode, the XC9235 series is PWM control, the XC9236 series is automatic PWM/PFM switching control and the XC9237 series
can be manually switched between the PWM control mode and the automatic PWM/PFM switching control mode, allowing fast
response, low ripple and high efficiency over the full range of loads (from light load to heavy load).
The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current
consumption to as low as 1.0μA or less. The B/F/G types have a high speed soft-start as fast as 0.25ms in typical for quick
turn-on. With the built-in UVLO (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when
input voltage becomes 1.4V or lower.
The B to G types integrate CL auto discharge function which enables the electric charge at the output capacitor CL to be
discharged via the internal auto-discharge switch located between the LX and VSS pins. When the devices enter stand-by mode,
output voltage quickly returns to the VSS level as a result of this function.
Two types of package SOT-25 and USP-6C are available.
■FEATURES
■APPLICATIONS
●Mobile phones, Smart phones
●Bluetooth headsets
P-ch Driver Transistor Built-In : ON resistance 0.42Ω
N-ch Driver Transistor Built-In : ON resistance 0.52Ω
Input Voltage
: 2.0V ~ 6.0V (A/B/C types)
: 1.8V ~ 6.0V (D/E/F/G types)
: 0.8V ~ 4.0V
●Mobile WiMAX PDAs, MIDs, UMPCs
●Portable game consoles
Output Voltage
●Digital cameras, Camcorders
●MP3 Players, Portable Media Players
●Notebook computers
High Efficiency
: 92% (TYP.)
Output Current
: 600mA
Oscillation Frequency
Maximum Duty Cycle
Control Methods
: 1.2MHz, 3.0MHz (+15%)
: 100%
: PWM (XC9235)
PWM/PFM Auto (XC9236)
PWM/PFM Manual (XC9237)
■TYPICAL APPLICATION CIRCUIT
Soft-Start Circuit Built-In
Current Limiter Circuit Built-In (Constant Current & Latching)
Low ESR Ceramic Capacitor Compatible
●XC9235/XC9236/XC9237
A/B/C/E/G types (Output Voltage Fixed)
Packages
: SOT-25, USP-6C
: B/C/D/E/F/G types
: B/F/G types
CL High Speed Discharge
High Speed Soft Start
* Performance depends on external components and wiring on the PCB.
■TYPICAL PERFORMANCE
CHARACTERISTICS
●Efficiency vs. Output Current（fOSC=1.2MHz, VOUT=1.8V）
●XC9235/XC9236/XC9237
PWM/PFM A utomatic Sw itc hing Control
100
D/F types (Output Voltage Externally Set)
90
80
VIN= 4.2V
70
PWM Control
VIN= 4.2V
3.6V
2.4V
3.6V
2.4V
60
50
40
30
20
10
0
0.1
1
10
100
1000
Output Current:IOUT(mA)
1/32
5秒后页面跳转
TLP250光耦合器：资料手册参数分析
DA14580 低功耗蓝牙系统级芯片(SoC)：资料手册参数分析
INA226 高精度电流和功率监控器：资料手册参数分析
SI2302 N沟道MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
