5.External dimensions
(Unit: mm)
6.Footprint(Recommended)
(Unit: mm)
In order to achieve optimum jitter performance,
the 0.1 μF capacitor between VCC and GND
should be placed. It is also recommended that
the capacitors are placed on the device side of
the PCB, as close to the device as possible and
connected together with short wiring pattern.
OE Pin = "H" : Specified frequency output.
OE Pin = "L" : Output is low level (weak pull - down)
ST Pin = "H" : Specified frequency output.
ST Pin = "L" : Output is low level (weak pull - down),
oscillation stops.
7.Reflow profile
Reflow condition (Follow of JEDEC STD-020D.1)
Temperature [ ºC]
300
TP:
TL:
+260ºC OVER
+255ºC
tp: at least 30 s
250
200
150
100
50
Ramp-up rate
+3 ºC/s Max.
Ramp-down rate
-6 ºC/s Max.
tL
+217ºC
Ts max: +200ºC
60 s to 150 s
( +217 ºC over )
ts
Ts min:
+150 ºC
60 s to 120 s
( +150ºC to +200ºC)
Time: +25 ºC to Peak
0
60
120
180
240
300
360
420
480
540
600
660
720
780
Time [ s ]
8.Packing information
[ 1 ]Product number last 2 digits code(xx) description
The recommended code is "00"
X1G0051810080xx
Condition
Condition
1000pcs / Reel
2000pcs / Reel
3000pcs / Reel
Code
01
Code
Any Q'ty vinyl bag(Tape cut)
Any Q'ty / Reel
14
15
00
11
12
250pcs / Reel
3 Page