Triple Output/TWR Models
Isolated, High Reliability 1" x 2" DC/DC Converters
Typical units
Packaged in 1" x 2" encapsulated modules, the TWR 22W series DC/DC converters offer three
outputs arranged as a unipolar low voltage supply and a higher voltage
FEATURES
bipolar output pair. The unipolar section supplies either +3.3V at 4A maximum or +5V at 3A
maximum. The bipolar outputs are either 12Vdc at 300mA maximum or 15Vdc at 250mA
and are ideal for op amps, linear or analog circuits. A single TWR converter can power applica-
tions with combined analog and digital circuits such as a CPU-controlled voice switch, embed-
ded telephone modem or analytical instruments.
ꢀ
12V/ 15V and 3.3V/5V outputs
ꢀ 10-18V, 18-36V or 36-75V inputs
ꢀ Up to 22.5 Watts total output power with
overtemperature shutdown
The input section is fully isolated from the outputs up to 1500Vdc minimum using Basic insula-
tion. Three wide input ranges are available including 10-18V (12Vdc nominal), 18-36V (24Vdc
nomimal) or 36-75V (48Vdc nominal). Peak-to-peak output ripple/noise is typically 80-100mV
at full load. Efficiencies range up to 87%.
ꢀ To 87% efficiency; 80-100mV Ripple and
Noise
ꢀ 1" x 2" x 0.5" encapsulated package
ꢀ 1500Vdc isolation for both outputs
The TWR 22W series outputs will limit their current if driven to overload and may be short
circuited indefinitely without damage. The inputs will shut down if input voltage is either over or
under limits or has reversed input voltage. These converters will operate at higher temperatures
with adequate airflow.
ꢀ Designed to meet UL 60950-1, CSA-C22.2
No. 60950-1, EN60950-1 safety approvals
ꢀ Extensive self-protection with short circuit
shutdown
The unipolar output features line and load regulation of 1%. Excellent dynamic response
assures transient load change settling within 100 microseconds. Other convenience features
include a remote On/Off control to turn the outputs on via digital logic, CPU bit, control transis-
tor or a relay.
ꢀ Output overvoltage and overcurrent
protection
ꢀ Input under and overvoltage shutdown
ꢀ Ideal for mixed analog/digital systems
Fabrication uses DATEL’s advanced surface mount automated pick-and-place assembly and
computer-controlled parameter testing. All TWR 22W series are designed to meet safety
requirements in UL, EN60950-1 and CSA-C22.2 No.60950-1.
ꢂꢃꢄꢀꢂꢃꢅ6
/54054
ꢂ).054
nꢃꢄꢀnꢃꢅ6
/54054
).054
#/--/.
ꢂꢆꢇꢆꢀꢂꢅ6
/54054
'!4%
$2)6%
/.ꢀ/&&
#/.42/,
0/3ꢀ.%'
3(54$/7.
07-
#/.42/,,%2
/54054
#/--/.
Figure 1. Simplified block diagram
2%&%2%.#% ꢁ
%22/2 !-0,)&)%2
/04/)3/,!4/2
&%%$"!#+
For full details go to
www.murata-ps.com/rohs
Typical topography is shown.
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_TWR22.B02 Page 1 of 9
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
