TM3000/TR2
Recommended Method of Storage
Dry box storage is recommended as soon as the aluminum bag has been opened to
prevent moisture absorption. The following conditions should be observed, if dry boxes are not
available:
z
z
Storage temperature 10℃ to 30℃
Storage humidity ≦60%RH max.
After more than 72hours under these conditions moisture content will be too high for
reflow soldering.
In case of moisture absorption, the devices will recover to the former condition by
drying under the following condition:
192 hours at 40℃+5℃/-0℃ and 5% RH(dry air/nitrogen) or
96 hours at 60℃+5℃ and <5% RH for all device containers or
24 hours at 125℃+5℃ not suitable for reel or tubes.
ESD Precaution
Proper storage and handling procedures should be followed to prevent ESD
damage to the devices especially when they are removed from the Antistatic Shielding
Bag. Electro-Static Sensitive Devices warning labels are on the packing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No: DTM-300-001
http://www.everlight.com
Prepared Date: 07-21-2005
Rev.2
Page: 11 of 10
Prepared By: Stephen Wang