Datasheet
Low Input Offset Voltage & Low Noise
Automotive High Precision & Input/Output
Rail-to-Rail CMOS Operational Amplifier
TLR376YG-C TLR2376Yxxx-C TLR4376YFV-C
General Description
Key Specifications
◼ Input Offset Voltage:
◼ Input-Referred Noise Voltage Density
f = 10 Hz:
This product is a high precision & Input/Output Rail-to-
Rail monolithic ICs integrated single, dual or quad
independent CMOS Op-Amps on a single chip. It features
low input offset voltage, low noise and low input bias
current. It is suitable for automotive requirements such as
engine control unit, electric power steering, anti-lock
braking system, sensor amplifier, and so on.
1.7 μV (Typ)
20 nV/√Hz (Typ)
8 nV/√Hz (Typ)
f = 1 kHz:
◼ Common-mode Input Voltage Range:
VSS to VDD
0.5 pA (Typ)
◼ Input Bias Current:
◼ Operating Supply Voltage Range
Single Supply:
2.5 V to 5.5 V
Dual Supply:
◼ Operating Temperature Range:
±1.25 V to ±2.75 V
-40 °C to +125 °C
Features
◼ AEC-Q100 Qualified(Note 1)
◼ Low input offset voltage
◼ Low Noise
Packages
SSOP5
W (Typ) x D (Typ) x H (Max)
2.9 mm x 2.8 mm x 1.25 mm
2.9 mm x 4.0 mm x 0.9 mm
4.9 mm x 6.0 mm x 1.65 mm
5.0 mm x 6.4 mm x 1.35 mm
◼ Input/Output Rail-to-Rail
(Note 1) Grade 1
MSOP8
SOP-J8
SSOP-B14
Applications
◼ Engine Control Unit
◼ Electric Power Steering (EPS)
◼ Anti-lock Braking System (ABS)
◼ Automotive Electronics
◼ Sensor Amplifiers
◼ Battery-powered Equipment
◼ Current Monitoring Amplifier
◼ ADC Front Ends, Buffer Amplifier
◼ Photodiode Amplifier
◼ Amplifiers
Typical Application Circuit
RF = 10 kΩ
VDD = +2.5 V
RIN = 100 Ω
푅퐹
푉푂푈푇 = −
푉
퐼푁
VIN
VOUT
푅퐼푁
VSS = -2.5 V
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays.
www.rohm.com
© 2021 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0GLG2G500060-1-2
15.Jul.2021 Rev.002
1/22